Techly Bidirectional Switch 8K DP1.4
Product information for Techly Bidirectional Switch 8K DP1.4, Displayport Splitter
Colour: Black
AUDIO VIDEO SYNCHRONIZATION: DP1.4 1In 2Out splitter gives you ultra high definition visual experience and two working modes widely used in home theater, studio, work, entertainment and many other occasions
SPLITTER DISPLAYPORT mode: Supports 8K @ 30Hz, 4K @ 120Hz, 1080P @ 240Hz resolution, offers transfer rates up to 32.4 Gbps and is backward compatible with all previous DP standards. (You need to connect a DP 1.4 cable to enjoy the visual effects.) NB: We recommend that the sum of the input and output cables does not exceed 3 meters, in order not to compromise the signal
TWO-WAY DP SWITCH mode: The DisplayPort switch allows you to connect two DP sources to a DP display or connect a DisplayPort source to switch between two displays. NB: Two displays cannot be shown at the same time. Requires power supply via USB cable
Technical specifications
Bidirectional switch
1 DP input → 2 DP outputs
Plug and play
Version: DP1.4
Bandwidth: 32.4 Gbps
Audio transmission: 32 bit, 24 bit / 1536 KHz
Deep color: 10 bit
2 green status LEDs
Dimensions
Width: 80 mm
Depth: 55 mm
Height: 15 mm
Package Contents
1x IDATA DP-2DP-8KT bidirectional switch
1x Charging cable
1x User Manual
| Suitable for 19 inch mounting: | False |
|---|---|
| Video Inputs: | Displayport |
| Video interface: | Displayport |
Technical properties
| Suitable for 19 inch mounting: | False |
|---|---|
| Video Inputs: | Displayport |
| Video interface: | Displayport |
Product information for Techly Bidirectional Switch 8K DP1.4, Displayport Splitter
Colour: Black
AUDIO VIDEO SYNCHRONIZATION: DP1.4 1In 2Out splitter gives you ultra high definition visual experience and two working modes widely used in home theater, studio, work, entertainment and many other occasions
SPLITTER DISPLAYPORT mode: Supports 8K @ 30Hz, 4K @ 120Hz, 1080P @ 240Hz resolution, offers transfer rates up to 32.4 Gbps and is backward compatible with all previous DP standards. (You need to connect a DP 1.4 cable to enjoy the visual effects.) NB: We recommend that the sum of the input and output cables does not exceed 3 meters, in order not to compromise the signal
TWO-WAY DP SWITCH mode: The DisplayPort switch allows you to connect two DP sources to a DP display or connect a DisplayPort source to switch between two displays. NB: Two displays cannot be shown at the same time. Requires power supply via USB cable
Technical specifications
Bidirectional switch
1 DP input → 2 DP outputs
Plug and play
Version: DP1.4
Bandwidth: 32.4 Gbps
Audio transmission: 32 bit, 24 bit / 1536 KHz
Deep color: 10 bit
2 green status LEDs
Dimensions
Width: 80 mm
Depth: 55 mm
Height: 15 mm
Package Contents
1x IDATA DP-2DP-8KT bidirectional switch
1x Charging cable
1x User Manual
| Suitable for 19 inch mounting: | False |
|---|---|
| Video Inputs: | Displayport |
| Video interface: | Displayport |
| Suitable for 19 inch mounting: | False |
|---|---|
| Video Inputs: | Displayport |
| Video interface: | Displayport |
Safety instructions
Warning: Danger of electric shocks and short circuits! Ensure proper earthing to avoid electric shocks. Avoid overloading as this can lead to overheating and short circuits. Check that the housing is undamaged and that there are no exposed contacts or bare wires. Ensure that all electrical connections are made correctly and that the ambient conditions comply with the technical specifications. Always keep a sufficient distance from live devices and avoid misuse. Important safety information to prevent accidents and damage during installation: Hazard: If the raised floor is used incorrectly, it may break. Action: Avoid walking on the raised floor unless the correct loads and load specifications are taken into account. Incorrect loading Hazard: Incorrect loading can lead to instability and damage. Action: Ensure that the load is even and prescribed according to the manufacturer's instructions. Enclosure falls due to weight being exceeded Hazard: Exceeding the maximum weight limit can destabilize the enclosure. Action: Check the maximum permissible load of the enclosure and ensure that this is not exceeded. Falling components due to inadequate fastening Hazard: Inadequately fastened components can fall and cause injury. Action: Ensure that all parts are properly and securely assembled. Housing parts breaking out due to incorrect loading Danger: Inadmissible loading leads to material damage and possible housing parts breaking out. Action: Ensure that the load is distributed correctly and that the recommended load is used. Risk of tipping due to uneven floor Danger: An uneven floor can cause the cabinet or device to tip over. Action: Make sure that the surface is level and stable to avoid the risk of tipping. Risk of tipping due to insufficient load-bearing capacity of the surface Danger: Insufficient load-bearing capacity of the surface can encourage the cabinet to tip over. Action: Check the load-bearing capacity of the surface before installation and ensure that it can safely support the weight. Cabinet can tip over if heavy server unit is pulled forward Danger: Pulling heavy server units forward can cause the cabinet to tip over. Action: Always secure cabinets and server units with suitable brackets and seek assistance when handling heavy equipment. Risk of tipping over with heavy cooling unit without safety measures Hazard: Improper fastening of cooling units to external brackets can cause the cabinet or device to tip over. Action: Secure cooling units with suitable devices to prevent tipping. Side walls fall off - sash lock not used correctly Hazard: Incorrectly used sash locks can cause the side walls of the cabinet to fall off. Action: Regularly check that all sash locks are correctly and securely fitted. Load capacity not provided Hazard: An insufficient load capacity can destabilise the system. Action: Before installation, check the load capacity information and ensure that the base and the shelves are sufficiently stable. Inadequate fastening when fitting accessories Hazard: Loosely fitted accessories can fall down dangerously. Action: Fasten all accessories carefully and regularly check them for strength. Insufficient wall statics - housing falls down Danger: Insufficient wall statics can cause the housing to fall down. Action: Before installation, make sure that the wall has sufficient static load-bearing capacity and that the housing can be installed safely. Injury from falling attachments Danger: Insufficiently secured attachments can fall down and cause injuries. Action: Make sure that all attachments are correctly secured and check them regularly.
Manufacturer information
IC Intracom Italia S.p.A.
Viale Europa, 33
33077 Sacile - Pordenone
info@techly.com
https://www.techly.com