Cat.7 Outdoor cable UC900 SS23/1 PETM
Cat.7 Outdoor cable UC900 SS23/1,4P PE, 100metres
Item number:
99731.100
EAN no.:
4049759146696
Product information for Cat.7 Outdoor cable UC900 SS23/1,4P PE, 100metres
The data cable is an installation cable with a thick-walled polyethylene outer sheath, suitable for direct burial, UV-resistant and for transmission rates up to 1000 MHz. Exeeds the electrical transmission properties and requirements of the category 7 and lower. Suitable for structured cabling of Class E, EA, F and according to ISO/IEC11801 (AMD 2:2009) resp. EN50173-1 (2009). With this cable transmission rates up to 10 GBit according to IEEE 802.3 are possible.
| AWG-size: | 23/1 |
|---|---|
| Armour: | none |
| Bending radius (dynamic): | 80 mm |
| Bending radius (static): | ≥ 40 mm |
| Cable: | EN 50288-4-1 900, IEC 61156-6 |
| Cable silicone free: | True |
| Cable structure: | S/FTP |
| Cable type: | Draka UC900 SS23 PE |
| Cabling standards: | EN 50173-1, ISO/IEC 11801 |
| Category: | 7 |
| Characteristic impedance: | 100 ± 5 Ohm |
| Conductor category: | Class 1 = solid |
| Conductor material: | Copper, bare |
| Core identification: | Colour |
| Core insulation: | Foam-Skin-PE |
| Coupling attenuation: | ≥ 85 dB |
| Delay skew: | ≤ 12 ns/100m |
| Diameter conductor: | 0.56 mm |
| Directive/Regulation: | RoHS 2011/65/UE |
| Euro class: | none |
| Flame retardant: | Nein |
| Halogen free: | No |
| Halogen free (acc. EN 50267-2-2): | False |
| Halogen free (according to EN 60754-1/2): | False |
| Harmonised Standard: | EN 50575 |
| Installation standard: | EN 50174 |
| Insulation resistance (500V): | ≥ 5000 MOhm/km |
| Jacket material: | Polyethylene (PE) |
| Loop resistance: | 165 Ohm/km |
| Low smoke: | No |
| Low smoke (acc. EN 61034-2): | False |
| Max. frequency: | MHz MHz |
| NVP value: | 79 % |
| Nominal cross section conductor: | 0.26 mm² |
| Operating capacity: | 43 pF/km |
| Operating temperature, fix: | -55 – 60 °C |
| Operating temperature, flexible: | -20 – 50 °C |
| Operating temperature, storage: | -20 – 60 °C |
| PoE: | acc. to IEEE802.3af PoE, acc. to IEEE802.3at PoE+, acc. to IEEE802.3bt 4PPoE |
| Resistance unbalance: | 2 % |
| Screen over stranding: | braiding |
| Screen over stranding element: | Foil |
| Separation class acc. EN50174-2: | D |
| Stranding element: | Pairs |
| Test voltage DC, 1 min: | 1000 V |
| Transfer impedance at 1MHz: | ≤ 10 mOhm/m |
| Transfer impedance at 10MHz: | ≤ 10 mOhm/m |
| Transfer impedance at 30MHz: | 30 mOhm/m |
| Transfer impedance at 100MHz: | ≤ 60 mOhm/m |
| Transmission standards: | IEEE 802.3 10Mbit bis 10Gbit |
| UV resistant: | True |
Technical properties
| AWG-size: | 23/1 |
|---|---|
| Armour: | none |
| Bending radius (dynamic): | 80 mm |
| Bending radius (static): | ≥ 40 mm |
| Cable: | EN 50288-4-1 900, IEC 61156-6 |
| Cable silicone free: | True |
| Cable structure: | S/FTP |
| Cable type: | Draka UC900 SS23 PE |
| Cabling standards: | EN 50173-1, ISO/IEC 11801 |
| Category: | 7 |
| Characteristic impedance: | 100 ± 5 Ohm |
| Conductor category: | Class 1 = solid |
| Conductor material: | Copper, bare |
| Core identification: | Colour |
| Core insulation: | Foam-Skin-PE |
| Coupling attenuation: | ≥ 85 dB |
| Delay skew: | ≤ 12 ns/100m |
| Diameter conductor: | 0.56 mm |
| Directive/Regulation: | RoHS 2011/65/UE |
| Euro class: | none |
| Flame retardant: | Nein |
| Halogen free: | No |
| Halogen free (acc. EN 50267-2-2): | False |
| Halogen free (according to EN 60754-1/2): | False |
| Harmonised Standard: | EN 50575 |
| Installation standard: | EN 50174 |
| Insulation resistance (500V): | ≥ 5000 MOhm/km |
| Jacket material: | Polyethylene (PE) |
| Loop resistance: | 165 Ohm/km |
| Low smoke: | No |
| Low smoke (acc. EN 61034-2): | False |
| Max. frequency: | MHz MHz |
| NVP value: | 79 % |
| Nominal cross section conductor: | 0.26 mm² |
| Operating capacity: | 43 pF/km |
| Operating temperature, fix: | -55 – 60 °C |
| Operating temperature, flexible: | -20 – 50 °C |
| Operating temperature, storage: | -20 – 60 °C |
| PoE: | acc. to IEEE802.3af PoE, acc. to IEEE802.3at PoE+, acc. to IEEE802.3bt 4PPoE |
| Resistance unbalance: | 2 % |
| Screen over stranding: | braiding |
| Screen over stranding element: | Foil |
| Separation class acc. EN50174-2: | D |
| Stranding element: | Pairs |
| Test voltage DC, 1 min: | 1000 V |
| Transfer impedance at 1MHz: | ≤ 10 mOhm/m |
| Transfer impedance at 10MHz: | ≤ 10 mOhm/m |
| Transfer impedance at 30MHz: | 30 mOhm/m |
| Transfer impedance at 100MHz: | ≤ 60 mOhm/m |
| Transmission standards: | IEEE 802.3 10Mbit bis 10Gbit |
| UV resistant: | True |
Variants
| Item no. | Name | RAL colour | Colour outer sheath | Type | Number of cores | Length | Copper weight | Weight | Max. tractive force | Outer diameter approx. | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 99731.100 | Cat.7 Outdoor cable UC900 SS23/1,4P PE, 100metres | RAL 9005 | black | simplex | 8 | 100.0 m | 38 kg/km | 95 kg/km | 340 N | 8.4 mm | |
| 99731.500 | Cat.7 Outdoor cable UC900 SS23/1,4P PE, 500metres | RAL 9005 | black | simplex | 8 | 500.0 m | 38 kg/km | 95 kg/km | 340 N | 8.4 mm |
Product information for Cat.7 Outdoor cable UC900 SS23/1,4P PE, 100metres
The data cable is an installation cable with a thick-walled polyethylene outer sheath, suitable for direct burial, UV-resistant and for transmission rates up to 1000 MHz. Exeeds the electrical transmission properties and requirements of the category 7 and lower. Suitable for structured cabling of Class E, EA, F and according to ISO/IEC11801 (AMD 2:2009) resp. EN50173-1 (2009). With this cable transmission rates up to 10 GBit according to IEEE 802.3 are possible.
| AWG-size: | 23/1 |
|---|---|
| Armour: | none |
| Bending radius (dynamic): | 80 mm |
| Bending radius (static): | ≥ 40 mm |
| Cable: | EN 50288-4-1 900, IEC 61156-6 |
| Cable silicone free: | True |
| Cable structure: | S/FTP |
| Cable type: | Draka UC900 SS23 PE |
| Cabling standards: | EN 50173-1, ISO/IEC 11801 |
| Category: | 7 |
| Characteristic impedance: | 100 ± 5 Ohm |
| Conductor category: | Class 1 = solid |
| Conductor material: | Copper, bare |
| Core identification: | Colour |
| Core insulation: | Foam-Skin-PE |
| Coupling attenuation: | ≥ 85 dB |
| Delay skew: | ≤ 12 ns/100m |
| Diameter conductor: | 0.56 mm |
| Directive/Regulation: | RoHS 2011/65/UE |
| Euro class: | none |
| Flame retardant: | Nein |
| Halogen free: | No |
| Halogen free (acc. EN 50267-2-2): | False |
| Halogen free (according to EN 60754-1/2): | False |
| Harmonised Standard: | EN 50575 |
| Installation standard: | EN 50174 |
| Insulation resistance (500V): | ≥ 5000 MOhm/km |
| Jacket material: | Polyethylene (PE) |
| Loop resistance: | 165 Ohm/km |
| Low smoke: | No |
| Low smoke (acc. EN 61034-2): | False |
| Max. frequency: | MHz MHz |
| NVP value: | 79 % |
| Nominal cross section conductor: | 0.26 mm² |
| Operating capacity: | 43 pF/km |
| Operating temperature, fix: | -55 – 60 °C |
| Operating temperature, flexible: | -20 – 50 °C |
| Operating temperature, storage: | -20 – 60 °C |
| PoE: | acc. to IEEE802.3af PoE, acc. to IEEE802.3at PoE+, acc. to IEEE802.3bt 4PPoE |
| Resistance unbalance: | 2 % |
| Screen over stranding: | braiding |
| Screen over stranding element: | Foil |
| Separation class acc. EN50174-2: | D |
| Stranding element: | Pairs |
| Test voltage DC, 1 min: | 1000 V |
| Transfer impedance at 1MHz: | ≤ 10 mOhm/m |
| Transfer impedance at 10MHz: | ≤ 10 mOhm/m |
| Transfer impedance at 30MHz: | 30 mOhm/m |
| Transfer impedance at 100MHz: | ≤ 60 mOhm/m |
| Transmission standards: | IEEE 802.3 10Mbit bis 10Gbit |
| UV resistant: | True |
| AWG-size: | 23/1 |
|---|---|
| Armour: | none |
| Bending radius (dynamic): | 80 mm |
| Bending radius (static): | ≥ 40 mm |
| Cable: | EN 50288-4-1 900, IEC 61156-6 |
| Cable silicone free: | True |
| Cable structure: | S/FTP |
| Cable type: | Draka UC900 SS23 PE |
| Cabling standards: | EN 50173-1, ISO/IEC 11801 |
| Category: | 7 |
| Characteristic impedance: | 100 ± 5 Ohm |
| Conductor category: | Class 1 = solid |
| Conductor material: | Copper, bare |
| Core identification: | Colour |
| Core insulation: | Foam-Skin-PE |
| Coupling attenuation: | ≥ 85 dB |
| Delay skew: | ≤ 12 ns/100m |
| Diameter conductor: | 0.56 mm |
| Directive/Regulation: | RoHS 2011/65/UE |
| Euro class: | none |
| Flame retardant: | Nein |
| Halogen free: | No |
| Halogen free (acc. EN 50267-2-2): | False |
| Halogen free (according to EN 60754-1/2): | False |
| Harmonised Standard: | EN 50575 |
| Installation standard: | EN 50174 |
| Insulation resistance (500V): | ≥ 5000 MOhm/km |
| Jacket material: | Polyethylene (PE) |
| Loop resistance: | 165 Ohm/km |
| Low smoke: | No |
| Low smoke (acc. EN 61034-2): | False |
| Max. frequency: | MHz MHz |
| NVP value: | 79 % |
| Nominal cross section conductor: | 0.26 mm² |
| Operating capacity: | 43 pF/km |
| Operating temperature, fix: | -55 – 60 °C |
| Operating temperature, flexible: | -20 – 50 °C |
| Operating temperature, storage: | -20 – 60 °C |
| PoE: | acc. to IEEE802.3af PoE, acc. to IEEE802.3at PoE+, acc. to IEEE802.3bt 4PPoE |
| Resistance unbalance: | 2 % |
| Screen over stranding: | braiding |
| Screen over stranding element: | Foil |
| Separation class acc. EN50174-2: | D |
| Stranding element: | Pairs |
| Test voltage DC, 1 min: | 1000 V |
| Transfer impedance at 1MHz: | ≤ 10 mOhm/m |
| Transfer impedance at 10MHz: | ≤ 10 mOhm/m |
| Transfer impedance at 30MHz: | 30 mOhm/m |
| Transfer impedance at 100MHz: | ≤ 60 mOhm/m |
| Transmission standards: | IEEE 802.3 10Mbit bis 10Gbit |
| UV resistant: | True |
Variants
| Item no. | Name | RAL colour | Colour outer sheath | Type | Number of cores | Length | Copper weight | Weight | Max. tractive force | Outer diameter approx. | |
|---|---|---|---|---|---|---|---|---|---|---|---|
| 99731.100 | Cat.7 Outdoor cable UC900 SS23/1,4P PE, 100metres | RAL 9005 | black | simplex | 8 | 100.0 m | 38 kg/km | 95 kg/km | 340 N | 8.4 mm | |
| 99731.500 | Cat.7 Outdoor cable UC900 SS23/1,4P PE, 500metres | RAL 9005 | black | simplex | 8 | 500.0 m | 38 kg/km | 95 kg/km | 340 N | 8.4 mm |
Safety instructions
Do not use the device if the cable or plug is damaged. This device may only be used in dry environments. Avoid faulty electrical connections. Only use the device within the specified voltage range.
Manufacturer information
Draka Comteq Germany GmbH & Co. KG
Piccoloministraße 2
51063 Köln
kontakt@prysmian.com
https://de.prysmiangroup.com/
Skip product gallery
sold with
Skip product gallery
necessary tools