Cat.7 outdoor cable UC900 SS23 (L)H + armouring + PE
ICS IE UC900 SS23 Cat.7 (L)H + armouring + PE, UV-resistant, black
Item number:
99739.1
EAN no.:
8717511645584
Product information for ICS IE UC900 SS23 Cat.7 (L)H + armouring + PE, UV-resistant, black
The data cable is an installation cable with a thick-walled polyethylene outer sheath and armouring, suitable for direct burial, UV-resistant Suitable for transmission rates up to 1000 MHz. A reinforcement of galvanized steel wire mesh serves as rodent protection. Due to a LSZH-interjacket, the cable is suitable for the use inside the building after removing the PE-jacket. The cable exceeds the requirements of the category 7 and lower with the electrical transmission properties. Suitable for structured cabling of Class E, EA, F according to ISO/IEC 11801 (AMD 2:2009) resp. EN 50173-1 (2009). With this cable, transmission rates up to 10 GBit according to IEEE 802.3 are possible.
Technical properties
| AWG-size: | 23/1 |
|---|---|
| Armour: | Galvanized steel wire braid |
| Bending radius (dynamic): | 80 mm |
| Bending radius (static): | ≥ 80 mm |
| Cable: |
EN 50288-4-1 900 IEC 61156-6 |
| Cable silicone free: | True |
| Cable structure: | S/FTP |
| Cable type: | Draka UC900 SS23 PE + BW + UV |
| Cabling standards: |
EN 50173-1 ISO/IEC 11801 |
| Capacity to earth: | 43 pF/km |
| Category: | 7 |
| Characteristic impedance: | 100 ± 5 Ohm |
| Conductor category: | Class 1 = solid |
| Conductor material: | Copper, bare |
| Core identification: | Colour |
| Core insulation: | Foam-Skin-PE |
| Coupling attenuation: | ≥ 85 dB |
| Delay skew: | ≤ 12 ns/100m |
| Diameter conductor: | 0.56 mm |
| Directive/Regulation: | RoHS 2011/65/UE |
| Euro class: | none |
| Flame retardant: | No |
| Halogen free: | False |
| Halogen free (acc. EN 50267-2-2): | False |
| Halogen free (according to EN 60754-1/2): | True |
| Harmonised Standard: | EN 50575 |
| Installation standard: | EN 50174 |
| Insulation resistance (500V): | ≥ 5000 MOhm/km |
| Jacket material: | Polyethylene (PE) |
| Loop resistance: | 154 Ohm/km |
| Low smoke: | nein |
| Low smoke (acc. EN 61034-2): | False |
| Max. frequency: | MHz MHz |
| NVP value: | 79 % |
| Nominal cross section conductor: | 0.26 mm² |
| Operating temperature, fix: | -20 – 75 °C |
| Operating temperature, flexible: | 0 – 50 °C |
| Operating temperature, storage: | -20 – 60 °C |
| PoE: |
acc. to IEEE802.3af PoE acc. to IEEE802.3at PoE+ acc. to IEEE802.3bt 4PPoE |
| Resistance unbalance: | 2 % |
| Screen over stranding: | braiding |
| Screen over stranding element: | Foil |
| Separation class acc. EN50174-2: | D |
| Stranding element: | Pairs |
| Test voltage DC, 1 min: | 1000 V |
| Transfer impedance at 1MHz: | ≤ 5 mOhm/m |
| Transfer impedance at 10MHz: | ≤ 5 mOhm/m |
| Transfer impedance at 30MHz: | ≤ 10 mOhm/m |
| Transfer impedance at 100MHz: | ≤ 20 mOhm/m |
| Transmission standards: | IEEE 802.3 10Mbit bis 10Gbit |
| UV resistant: | yes |
Safety instructions
Do not use the device if the cable or plug is damaged. This device may only be used in dry environments. Avoid faulty electrical connections. Only use the device within the specified voltage range.
Manufacturer information
EFB-Elektronik GmbH
Striegauer Straße 1
33719 Bielefeld
info@efb-elektronik.de
https://www.efb-elektronik.de/kontakt
