Network Cabinet PRO 42U, 600x600 mm, RAL9005
Product information for Network Cabinet PRO 42U, 600x600 mm, RAL9005
• 42U in a compact 600 x 600 mm format – Creates a lot of installation height with a small footprint for dense network installations.
• Up to 1000 kg load capacity and bolted frame – Ensures high dimensional stability even with heavy loading.
• Passive ventilation with cable entries in the roof, floor and rear door – Supports clean ducting and does not require active cooling.
The cabinet is designed for the structured installation of network and IT components with increased space and cabling requirements. The completely pre-assembled frame with fixed frame provides a resilient base. The mounting levels at the front and rear facilitate assembly. The passive ventilation supports thermally non-critical operation. Cable entries in the roof, floor and rear door as well as the air inlet in the floor create flexible paths for cable routing. The front door made of safety glass enables visual inspection. Earthing, side panels and the replaceable profile half-cylinder in the front door complete the safety concept.
Technical details
• Number of doors: 2
• Degree of protection: IP20 according to EN 60529
• Type of ventilation: passive
• Floor air inlet: Break-out opening type A (380 x 380 mm), e.g. for filter or cable entry modules
• With earthing: Yes
• With roof panel: Yes
• With front door: Yes
• With side panels: Yes
• With rear door: Yes
• Mounting level: front and rear
• Front door design: one-piece glass door (certified safety glass, glass thickness 5 mm)
• Front door opening angle: 270°
• Rear door opening angle: 110°
• Front door locking: 3-point bar closure with swing handle
• Locking of the rear door: 2-point quarter-turn latch
• Replaceable profile half-cylinder in front door: Yes, in accordance with DIN 18252 (30/10 mm)
• Scope of delivery: 1x cabinet, 1 x brush strip, 1 x cage nut set (pack of 20 pieces), earthing rail and earthing cable, 4 x levelling feet M12, 2 x keys
• Packaging: Delivered in transport packaging on a single-use pallet
| Active air conditioning: | False |
|---|---|
| Air inlet floor: | Breakout opening type A (380 x 380 mm), e.g. for filter or cable entry modules |
| Cabinet Series: | PRO |
| Cable entry rear door: | 3U panel including brush, opening 690 x 67 mm, usable from the bottom or top |
| Cable entry roof/floor: | Roof and base each with 1 pre-cut, breakable opening (at the back), each 450 x 89 mm (re-sealable with a 19" 2U blanking plate) |
| Category: | 19" network cabinet according to DIN41494 |
| Degree of protection: | IP20 according to EN60529 |
| Demountable: | True |
| Door hinge reversible front door: | True |
| Door hinge reversible rear door: | True |
| Door opening angle front door: | 270 ° |
| Door opening angle rear door: | 110 ° |
| Frame: | screwed together, completely pre-assembled |
| Material: | Steel |
| Model: | With permanent frame |
| Modular spacing: | 482,6 mm (19 inch) |
| Mounting level: | Front and rear |
| Number of cartons: | 1 |
| PHC replaceable front door: | True, according to DIN18252 (30/10 mm) |
| PHC replaceable rear door: | False |
| Packaging: | Delivery in transport packaging on a disposable pallet |
| Scope of delivery: | 1x cabinet, 1 x brush strip, 1 x cage nut set (20 pieces per pack), grounding rail and grounding cable, 4 x M12 leveling feet, 2 x keys |
| Stackable: | True |
| Surface finishing: | Powder coating |
| Type of back door: | Steel door 1-part |
| Type of front door: | Glass door 1-part (certified safety glass, glass thickness 5 mm) |
| Type of profile rail: | Crank |
| Type of ventilation: | Passive |
| With backside door: | True |
| With earthing: | True |
| With front door: | True |
| With roof plate: | True |
| With sidewall: | True |
| With socket: | False |
Technical properties
| Active air conditioning: | False |
|---|---|
| Air inlet floor: | Breakout opening type A (380 x 380 mm), e.g. for filter or cable entry modules |
| Cabinet Series: | PRO |
| Cable entry rear door: | 3U panel including brush, opening 690 x 67 mm, usable from the bottom or top |
| Cable entry roof/floor: | Roof and base each with 1 pre-cut, breakable opening (at the back), each 450 x 89 mm (re-sealable with a 19" 2U blanking plate) |
| Category: | 19" network cabinet according to DIN41494 |
| Degree of protection: | IP20 according to EN60529 |
| Demountable: | True |
| Door hinge reversible front door: | True |
| Door hinge reversible rear door: | True |
| Door opening angle front door: | 270 ° |
| Door opening angle rear door: | 110 ° |
| Frame: | screwed together, completely pre-assembled |
| Material: | Steel |
| Model: | With permanent frame |
| Modular spacing: | 482,6 mm (19 inch) |
| Mounting level: | Front and rear |
| Number of cartons: | 1 |
| PHC replaceable front door: | True, according to DIN18252 (30/10 mm) |
| PHC replaceable rear door: | False |
| Packaging: | Delivery in transport packaging on a disposable pallet |
| Scope of delivery: | 1x cabinet, 1 x brush strip, 1 x cage nut set (20 pieces per pack), grounding rail and grounding cable, 4 x M12 leveling feet, 2 x keys |
| Stackable: | True |
| Surface finishing: | Powder coating |
| Type of back door: | Steel door 1-part |
| Type of front door: | Glass door 1-part (certified safety glass, glass thickness 5 mm) |
| Type of profile rail: | Crank |
| Type of ventilation: | Passive |
| With backside door: | True |
| With earthing: | True |
| With front door: | True |
| With roof plate: | True |
| With sidewall: | True |
| With socket: | False |
Variants
| Item no. | Name | Depth | Max. load capacity | Colour | Front door locking system | Width | Material rear door | Number of height units | Rear door locking system | With vertical cable management | Material front door | Height | RAL-number | Number of doors | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PRO-1866GR.G1SV | Network Cabinet PRO 18U, 600x600 mm, RAL7035 | 600 mm | 1000 kg | grey | 1-point latch locking mechanism with swivel lever | 600 mm | Steel | 18 U | 2-point latch locking mechanism | False | Glass | 896 mm | 7035 | 2 | |
| PRO-2466GR.G1SV | Network Cabinet PRO 24U, 600x600 mm, RAL7035 | 600 mm | 1000 kg | grey | 1-point latch locking mechanism with swivel lever | 600 mm | Steel | 24 U | 2-point latch locking mechanism | False | Glass | 1163 mm | 7035 | 2 | |
| PRO-2466TS.G1SV | Network Cabinet PRO 24U, 600x600 mm RAL9005 | 600 mm | 1000 kg | black | 1-point latch locking mechanism with swivel lever | 600 mm | Steel | 24 U | 2-point latch locking mechanism | False | Glass | 1163 mm | 9005 | 2 | |
| PRO-3366GR.G1SV | Network Cabinet PRO 33U, 600x600 mm, RAL7035 | 600 mm | 1000 kg | grey | 3-point rod locking mechanism with swivel lever | 600 mm | Steel | 33 HE | 2-point latch locking mechanism | False | Glass | 1563 mm | 7035 | 2 | |
| PRO-4266GR.G1SV | Network Cabinet PRO 42U, 600x600 mm, RAL7035 | 600 mm | 1000 kg | grey | 3-point rod locking mechanism with swivel lever | 600 mm | Steel | 42 HE | 2-point latch locking mechanism | False | Glass | 1963 mm | 7035 | 2 | |
| PRO-4266TS.G1SV | Network Cabinet PRO 42U, 600x600 mm, RAL9005 | 600 mm | 1000 kg | black | 3-point rod locking mechanism with swivel lever | 600 mm | Steel | 42 HE | 2-point latch locking mechanism | False | Glass | 1963 mm | 9005 | 2 |
Product information for Network Cabinet PRO 42U, 600x600 mm, RAL9005
• 42U in a compact 600 x 600 mm format – Creates a lot of installation height with a small footprint for dense network installations.
• Up to 1000 kg load capacity and bolted frame – Ensures high dimensional stability even with heavy loading.
• Passive ventilation with cable entries in the roof, floor and rear door – Supports clean ducting and does not require active cooling.
The cabinet is designed for the structured installation of network and IT components with increased space and cabling requirements. The completely pre-assembled frame with fixed frame provides a resilient base. The mounting levels at the front and rear facilitate assembly. The passive ventilation supports thermally non-critical operation. Cable entries in the roof, floor and rear door as well as the air inlet in the floor create flexible paths for cable routing. The front door made of safety glass enables visual inspection. Earthing, side panels and the replaceable profile half-cylinder in the front door complete the safety concept.
Technical details
• Number of doors: 2
• Degree of protection: IP20 according to EN 60529
• Type of ventilation: passive
• Floor air inlet: Break-out opening type A (380 x 380 mm), e.g. for filter or cable entry modules
• With earthing: Yes
• With roof panel: Yes
• With front door: Yes
• With side panels: Yes
• With rear door: Yes
• Mounting level: front and rear
• Front door design: one-piece glass door (certified safety glass, glass thickness 5 mm)
• Front door opening angle: 270°
• Rear door opening angle: 110°
• Front door locking: 3-point bar closure with swing handle
• Locking of the rear door: 2-point quarter-turn latch
• Replaceable profile half-cylinder in front door: Yes, in accordance with DIN 18252 (30/10 mm)
• Scope of delivery: 1x cabinet, 1 x brush strip, 1 x cage nut set (pack of 20 pieces), earthing rail and earthing cable, 4 x levelling feet M12, 2 x keys
• Packaging: Delivered in transport packaging on a single-use pallet
| Active air conditioning: | False |
|---|---|
| Air inlet floor: | Breakout opening type A (380 x 380 mm), e.g. for filter or cable entry modules |
| Cabinet Series: | PRO |
| Cable entry rear door: | 3U panel including brush, opening 690 x 67 mm, usable from the bottom or top |
| Cable entry roof/floor: | Roof and base each with 1 pre-cut, breakable opening (at the back), each 450 x 89 mm (re-sealable with a 19" 2U blanking plate) |
| Category: | 19" network cabinet according to DIN41494 |
| Degree of protection: | IP20 according to EN60529 |
| Demountable: | True |
| Door hinge reversible front door: | True |
| Door hinge reversible rear door: | True |
| Door opening angle front door: | 270 ° |
| Door opening angle rear door: | 110 ° |
| Frame: | screwed together, completely pre-assembled |
| Material: | Steel |
| Model: | With permanent frame |
| Modular spacing: | 482,6 mm (19 inch) |
| Mounting level: | Front and rear |
| Number of cartons: | 1 |
| PHC replaceable front door: | True, according to DIN18252 (30/10 mm) |
| PHC replaceable rear door: | False |
| Packaging: | Delivery in transport packaging on a disposable pallet |
| Scope of delivery: | 1x cabinet, 1 x brush strip, 1 x cage nut set (20 pieces per pack), grounding rail and grounding cable, 4 x M12 leveling feet, 2 x keys |
| Stackable: | True |
| Surface finishing: | Powder coating |
| Type of back door: | Steel door 1-part |
| Type of front door: | Glass door 1-part (certified safety glass, glass thickness 5 mm) |
| Type of profile rail: | Crank |
| Type of ventilation: | Passive |
| With backside door: | True |
| With earthing: | True |
| With front door: | True |
| With roof plate: | True |
| With sidewall: | True |
| With socket: | False |
| Active air conditioning: | False |
|---|---|
| Air inlet floor: | Breakout opening type A (380 x 380 mm), e.g. for filter or cable entry modules |
| Cabinet Series: | PRO |
| Cable entry rear door: | 3U panel including brush, opening 690 x 67 mm, usable from the bottom or top |
| Cable entry roof/floor: | Roof and base each with 1 pre-cut, breakable opening (at the back), each 450 x 89 mm (re-sealable with a 19" 2U blanking plate) |
| Category: | 19" network cabinet according to DIN41494 |
| Degree of protection: | IP20 according to EN60529 |
| Demountable: | True |
| Door hinge reversible front door: | True |
| Door hinge reversible rear door: | True |
| Door opening angle front door: | 270 ° |
| Door opening angle rear door: | 110 ° |
| Frame: | screwed together, completely pre-assembled |
| Material: | Steel |
| Model: | With permanent frame |
| Modular spacing: | 482,6 mm (19 inch) |
| Mounting level: | Front and rear |
| Number of cartons: | 1 |
| PHC replaceable front door: | True, according to DIN18252 (30/10 mm) |
| PHC replaceable rear door: | False |
| Packaging: | Delivery in transport packaging on a disposable pallet |
| Scope of delivery: | 1x cabinet, 1 x brush strip, 1 x cage nut set (20 pieces per pack), grounding rail and grounding cable, 4 x M12 leveling feet, 2 x keys |
| Stackable: | True |
| Surface finishing: | Powder coating |
| Type of back door: | Steel door 1-part |
| Type of front door: | Glass door 1-part (certified safety glass, glass thickness 5 mm) |
| Type of profile rail: | Crank |
| Type of ventilation: | Passive |
| With backside door: | True |
| With earthing: | True |
| With front door: | True |
| With roof plate: | True |
| With sidewall: | True |
| With socket: | False |
Variants
| Item no. | Name | Depth | Max. load capacity | Colour | Front door locking system | Width | Material rear door | Number of height units | Rear door locking system | With vertical cable management | Material front door | Height | RAL-number | Number of doors | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|---|
| PRO-1866GR.G1SV | Network Cabinet PRO 18U, 600x600 mm, RAL7035 | 600 mm | 1000 kg | grey | 1-point latch locking mechanism with swivel lever | 600 mm | Steel | 18 U | 2-point latch locking mechanism | False | Glass | 896 mm | 7035 | 2 | |
| PRO-2466GR.G1SV | Network Cabinet PRO 24U, 600x600 mm, RAL7035 | 600 mm | 1000 kg | grey | 1-point latch locking mechanism with swivel lever | 600 mm | Steel | 24 U | 2-point latch locking mechanism | False | Glass | 1163 mm | 7035 | 2 | |
| PRO-2466TS.G1SV | Network Cabinet PRO 24U, 600x600 mm RAL9005 | 600 mm | 1000 kg | black | 1-point latch locking mechanism with swivel lever | 600 mm | Steel | 24 U | 2-point latch locking mechanism | False | Glass | 1163 mm | 9005 | 2 | |
| PRO-3366GR.G1SV | Network Cabinet PRO 33U, 600x600 mm, RAL7035 | 600 mm | 1000 kg | grey | 3-point rod locking mechanism with swivel lever | 600 mm | Steel | 33 HE | 2-point latch locking mechanism | False | Glass | 1563 mm | 7035 | 2 | |
| PRO-4266GR.G1SV | Network Cabinet PRO 42U, 600x600 mm, RAL7035 | 600 mm | 1000 kg | grey | 3-point rod locking mechanism with swivel lever | 600 mm | Steel | 42 HE | 2-point latch locking mechanism | False | Glass | 1963 mm | 7035 | 2 | |
| PRO-4266TS.G1SV | Network Cabinet PRO 42U, 600x600 mm, RAL9005 | 600 mm | 1000 kg | black | 3-point rod locking mechanism with swivel lever | 600 mm | Steel | 42 HE | 2-point latch locking mechanism | False | Glass | 1963 mm | 9005 | 2 |
Safety instructions
Do not use the device if the cable or plug is damaged. This device may only be used in dry environments. Avoid faulty electrical connections. Only use the device within the specified voltage range. Do not block any ventilation openings to prevent components from overheating. Do not operate the appliance beyond the permissible connected loads to prevent overloading and excessive heat generation. Ensure that the device does not overheat during operation. Warning: Danger of electric shocks and short circuits! Ensure proper earthing to avoid electric shocks. Avoid overloading as this can lead to overheating and short circuits. Check that the housing is undamaged and that there are no exposed contacts or bare wires. Ensure that all electrical connections are made correctly and that the ambient conditions comply with the technical specifications. Always keep a sufficient distance from live devices and avoid misuse. Warning: Pay attention to the assembly sequence! Observe the correct assembly sequence, see instructions. Important safety information to prevent accidents and damage during installation: Hazard: If the raised floor is used incorrectly, it may break. Action: Avoid walking on the raised floor unless the correct loads and load specifications are taken into account. Incorrect loading Hazard: Incorrect loading can lead to instability and damage. Action: Ensure that the load is even and prescribed according to the manufacturer's instructions. Enclosure falls due to weight being exceeded Hazard: Exceeding the maximum weight limit can destabilize the enclosure. Action: Check the maximum permissible load of the enclosure and ensure that this is not exceeded. Falling components due to inadequate fastening Hazard: Inadequately fastened components can fall and cause injury. Action: Ensure that all parts are properly and securely assembled. Housing parts breaking out due to incorrect loading Danger: Inadmissible loading leads to material damage and possible housing parts breaking out. Action: Ensure that the load is distributed correctly and that the recommended load is used. Risk of tipping due to uneven floor Danger: An uneven floor can cause the cabinet or device to tip over. Action: Make sure that the surface is level and stable to avoid the risk of tipping. Risk of tipping due to insufficient load-bearing capacity of the surface Danger: Insufficient load-bearing capacity of the surface can encourage the cabinet to tip over. Action: Check the load-bearing capacity of the surface before installation and ensure that it can safely support the weight. Cabinet can tip over if heavy server unit is pulled forward Danger: Pulling heavy server units forward can cause the cabinet to tip over. Action: Always secure cabinets and server units with suitable brackets and seek assistance when handling heavy equipment. Risk of tipping over with heavy cooling unit without safety measures Hazard: Improper fastening of cooling units to external brackets can cause the cabinet or device to tip over. Action: Secure cooling units with suitable devices to prevent tipping. Side walls fall off - sash lock not used correctly Hazard: Incorrectly used sash locks can cause the side walls of the cabinet to fall off. Action: Regularly check that all sash locks are correctly and securely fitted. Load capacity not provided Hazard: An insufficient load capacity can destabilise the system. Action: Before installation, check the load capacity information and ensure that the base and the shelves are sufficiently stable. Inadequate fastening when fitting accessories Hazard: Loosely fitted accessories can fall down dangerously. Action: Fasten all accessories carefully and regularly check them for strength. Insufficient wall statics - housing falls down Danger: Insufficient wall statics can cause the housing to fall down. Action: Before installation, make sure that the wall has sufficient static load-bearing capacity and that the housing can be installed safely. Injury from falling attachments Danger: Insufficiently secured attachments can fall down and cause injuries. Action: Make sure that all attachments are correctly secured and check them regularly. Warning: Do not exceed the load capacity! If the specified load capacity is exceeded, serious injuries may occur due to instability of the product.
Manufacturer information
accessory
Item no. 691750TS.66PB
Plinth Universal 600 x 600 mm, H=100 mm, RAL9005
Item no. PRO-SOK66PB.TS
Plinth for PRO 600x600 mm, H=100 mm, RAL7035