RJ45 Patch Cord Cat.6A U/UTP TPE 500Mhz superflex red 10m
EFB
RJ45 Patch Cord Cat.6A U/UTP TPE 500Mhz superflex red 10m
Item number:
K8119RT.10
EAN no.:
4049759346928
Product information for RJ45 Patch Cord Cat.6A U/UTP TPE 500Mhz superflex red 10m
High-performance network connections with a flexible, halogen-free TPE jacket
The EFB-Elektronik Cat.6A (TIA) U/UTP patch cable enables data transmission speeds of up to 10 Gbps and supports a frequency range of up to 500 MHz. This makes it ideal for high-performance Ethernet connections in IT and home network applications.
The halogen-free TPE jacket combines low-smoke, halogen-free properties with greater flexibility compared to conventional jacket materials. The unshielded U/UTP design allows for simple, cost-effective networking in low-interference environments. Pure copper conductors, gold-plated contacts, and a 1:1 pin assignment (TIA/EIA 568B) ensure reliable signal transmission.
Your benefits at a glance
10 Gbps at up to 500 MHz – high transmission performance for modern Ethernet networks up to Cat.6A (TIA).
Flexible TPE jacket – makes installation and handling easier while offering halogen-free and low-smoke material properties.
Up to 4PPoE (IEEE 802.3bt) – supports powering compatible network devices via the data cable, making it suitable for PoE applications.
Product Highlights
Cat.6A (TIA) for data transmission up to 10 Gbps
Frequency range up to 500 MHz
U/UTP design with 4x2 x AWG24/7
RJ45 8(8) to RJ45 8(8) with blue RJ45 connectors
1:1 pin assignment according to TIA/EIA 568B
PoE (IEEE 802.3af), PoE+ (IEEE 802.3at), and up to 4PPoE (IEEE 802.3bt)
Halogen-free, low-smoke TPE jacket
Flame-retardant (IEC 60332-1), low-smoke (IEC 61034), and halogen-free (IEC 60754-2)
Pure copper conductors and gold-plated contacts
Molded strain relief and latch protection
Outer diameter 6.0 mm, bending radius >30 mm
IP20 rating and ≥750 mating cycles
Ideal for
Ethernet connections in IT and home networks
10-Gigabit Ethernet applications
Patch connections in low-interference network environments
PoE, PoE+, and 4PPoE applications
Applications requiring a flexible and halogen-free patch cable.
The EFB-Elektronik Cat.6A (TIA) U/UTP patch cable enables data transmission speeds of up to 10 Gbps and supports a frequency range of up to 500 MHz. This makes it ideal for high-performance Ethernet connections in IT and home network applications.
The halogen-free TPE jacket combines low-smoke, halogen-free properties with greater flexibility compared to conventional jacket materials. The unshielded U/UTP design allows for simple, cost-effective networking in low-interference environments. Pure copper conductors, gold-plated contacts, and a 1:1 pin assignment (TIA/EIA 568B) ensure reliable signal transmission.
Your benefits at a glance
10 Gbps at up to 500 MHz – high transmission performance for modern Ethernet networks up to Cat.6A (TIA).
Flexible TPE jacket – makes installation and handling easier while offering halogen-free and low-smoke material properties.
Up to 4PPoE (IEEE 802.3bt) – supports powering compatible network devices via the data cable, making it suitable for PoE applications.
Product Highlights
Cat.6A (TIA) for data transmission up to 10 Gbps
Frequency range up to 500 MHz
U/UTP design with 4x2 x AWG24/7
RJ45 8(8) to RJ45 8(8) with blue RJ45 connectors
1:1 pin assignment according to TIA/EIA 568B
PoE (IEEE 802.3af), PoE+ (IEEE 802.3at), and up to 4PPoE (IEEE 802.3bt)
Halogen-free, low-smoke TPE jacket
Flame-retardant (IEC 60332-1), low-smoke (IEC 61034), and halogen-free (IEC 60754-2)
Pure copper conductors and gold-plated contacts
Molded strain relief and latch protection
Outer diameter 6.0 mm, bending radius >30 mm
IP20 rating and ≥750 mating cycles
Ideal for
Ethernet connections in IT and home networks
10-Gigabit Ethernet applications
Patch connections in low-interference network environments
PoE, PoE+, and 4PPoE applications
Applications requiring a flexible and halogen-free patch cable.
| AWG-size: | 24/7 |
|---|---|
| Allocation: | acc. TIA/EIA 568B |
| Anti-kink sleeve: | moulded-on |
| Area of Application: | Industrial Ethernet, Structured cabling |
| Bandwidth: | 500MHz |
| Bending radius: | >30 mm |
| Cable construction: | 4x2 |
| Cable shape: | rund |
| Cable type: | U/UTP |
| Cabling standard: | ANSI/TIA-568, EN50173, ISO/IEC 11801 |
| Category: | 6A (TIA) |
| Colour anti-kink sleeve: | red |
| Colour outer sheath: | red |
| Conductive shield: | No |
| Conductor Material: | Copper |
| Connector: | IEC 60603-7-41 |
| Connector type: | RJ45 standard blue |
| Contacts: | Gold plated |
| Current capacity: | max. 1 A |
| Fire retardant version: | acc. IEC60332-1 |
| Halogen free: | acc. IEC60754-2 |
| Impedance: | 100 |
| Length imprint: | True |
| Locking lever: | True |
| Low smoke: | acc. IEC61034 |
| Material outer sheath: | TPE/LSZH |
| Mating cycles: | ≥750 |
| Model: | unshielded |
| Oil resistant: | no |
| Operating-/ tempering voltage: | max. 50 V DC |
| Operating Temperature: | -20 – 60 °C |
| Outer diameter of the cable: | 6.0 mm |
| Ozone resistance: | No |
| Pin assignment: | 1:1 |
| Printing: | Cat.6A U/UTP 4x2xAWG24/7 TPE ISO/IEC 11801 & EN50173-1 ANSI/TIA-568-C.2 *10Gigabit Ethernet* www.efb-elektronik.de |
| Resistant to chemicals: | False |
| Suitable for degree of protection (IP): | IP20 |
| Test voltage: | 1000 (V DC, 1min) core/core und core/screen |
| Transmission: | 10Gbit |
| Type of connector connection 1: | RJ45 8(8) |
| Type of connector connection 2: | RJ45 8(8) |
| UL approbated: | True |
Technical properties
| AWG-size: | 24/7 |
|---|---|
| Allocation: | acc. TIA/EIA 568B |
| Anti-kink sleeve: | moulded-on |
| Area of Application: | Industrial Ethernet, Structured cabling |
| Bandwidth: | 500MHz |
| Bending radius: | >30 mm |
| Cable construction: | 4x2 |
| Cable shape: | rund |
| Cable type: | U/UTP |
| Cabling standard: | ANSI/TIA-568, EN50173, ISO/IEC 11801 |
| Category: | 6A (TIA) |
| Colour anti-kink sleeve: | red |
| Colour outer sheath: | red |
| Conductive shield: | No |
| Conductor Material: | Copper |
| Connector: | IEC 60603-7-41 |
| Connector type: | RJ45 standard blue |
| Contacts: | Gold plated |
| Current capacity: | max. 1 A |
| Fire retardant version: | acc. IEC60332-1 |
| Halogen free: | acc. IEC60754-2 |
| Impedance: | 100 |
| Length imprint: | True |
| Locking lever: | True |
| Low smoke: | acc. IEC61034 |
| Material outer sheath: | TPE/LSZH |
| Mating cycles: | ≥750 |
| Model: | unshielded |
| Oil resistant: | no |
| Operating-/ tempering voltage: | max. 50 V DC |
| Operating Temperature: | -20 – 60 °C |
| Outer diameter of the cable: | 6.0 mm |
| Ozone resistance: | No |
| Pin assignment: | 1:1 |
| Printing: | Cat.6A U/UTP 4x2xAWG24/7 TPE ISO/IEC 11801 & EN50173-1 ANSI/TIA-568-C.2 *10Gigabit Ethernet* www.efb-elektronik.de |
| Resistant to chemicals: | False |
| Suitable for degree of protection (IP): | IP20 |
| Test voltage: | 1000 (V DC, 1min) core/core und core/screen |
| Transmission: | 10Gbit |
| Type of connector connection 1: | RJ45 8(8) |
| Type of connector connection 2: | RJ45 8(8) |
| UL approbated: | True |
Variants
| Item no. | Name | Length | POE class | Length tolerance | |
|---|---|---|---|---|---|
| K8119RT.0,25 | RJ45 Patch Cord Cat.6A U/UTP TPE 500Mhz superflex red 0.25m | 0.25 m | PoE acc. to IEEE802.3af;PoE+ acc. to IEEE802.3at;4PPoE acc. to IEEE802.3bt | ±5 % | |
| K8119RT.0,5 | RJ45 Patch Cord Cat.6A U/UTP TPE 500Mhz superflex red 0.5m | 0.5 m | PoE acc. to IEEE802.3af;PoE+ acc. to IEEE802.3at;4PPoE acc. to IEEE802.3bt | ±5 % | |
| K8119RT.1 | RJ45 Patch Cord Cat.6A U/UTP TPE 500Mhz superflex red 1m | 1.0 m | PoE acc. to IEEE802.3af;PoE+ acc. to IEEE802.3at;4PPoE acc. to IEEE802.3bt | ±5 % | |
| K8119RT.1,5 | RJ45 Patch Cord Cat.6A U/UTP TPE 500Mhz superflex red 1.5m | 1.5 m | PoE acc. to IEEE802.3af;PoE+ acc. to IEEE802.3at;4PPoE acc. to IEEE802.3bt | ±5 % | |
| K8119RT.10 | RJ45 Patch Cord Cat.6A U/UTP TPE 500Mhz superflex red 10m | 10.0 m | PoE acc. to IEEE802.3af;PoE+ acc. to IEEE802.3at;4PPoE acc. to IEEE802.3bt | ±5 % | |
| K8119RT.15 | RJ45 Patch Cord Cat.6A U/UTP TPE 500Mhz superflex red 15m | 15.0 m | PoE acc. to IEEE802.3af;PoE+ acc. to IEEE802.3at;4PPoE acc. to IEEE802.3bt | ±5 % | |
| K8119RT.2 | RJ45 Patch Cord Cat.6A U/UTP TPE 500Mhz superflex red 2m | 2.0 m | PoE acc. to IEEE802.3af;PoE+ acc. to IEEE802.3at;4PPoE acc. to IEEE802.3bt | ±5 % | |
| K8119RT.3 | RJ45 Patch Cord Cat.6A U/UTP TPE 500Mhz superflex red 3m | 3.0 m | PoE acc. to IEEE802.3af;PoE+ acc. to IEEE802.3at;4PPoE acc. to IEEE802.3bt | ±5 % | |
| K8119RT.5 | RJ45 Patch Cord Cat.6A U/UTP TPE 500Mhz superflex red 5m | 5.0 m | PoE acc. to IEEE802.3af;PoE+ acc. to IEEE802.3at;4PPoE acc. to IEEE802.3bt | ±5 % | |
| K8119RT.7,5 | RJ45 Patch Cord Cat.6A U/UTP TPE 500Mhz superflex red 7.5m | 7.5 m | PoE acc. to IEEE802.3af;PoE+ acc. to IEEE802.3at;4PPoE acc. to IEEE802.3bt | ±5 % |
Product information for RJ45 Patch Cord Cat.6A U/UTP TPE 500Mhz superflex red 10m
High-performance network connections with a flexible, halogen-free TPE jacket
The EFB-Elektronik Cat.6A (TIA) U/UTP patch cable enables data transmission speeds of up to 10 Gbps and supports a frequency range of up to 500 MHz. This makes it ideal for high-performance Ethernet connections in IT and home network applications.
The halogen-free TPE jacket combines low-smoke, halogen-free properties with greater flexibility compared to conventional jacket materials. The unshielded U/UTP design allows for simple, cost-effective networking in low-interference environments. Pure copper conductors, gold-plated contacts, and a 1:1 pin assignment (TIA/EIA 568B) ensure reliable signal transmission.
Your benefits at a glance
10 Gbps at up to 500 MHz – high transmission performance for modern Ethernet networks up to Cat.6A (TIA).
Flexible TPE jacket – makes installation and handling easier while offering halogen-free and low-smoke material properties.
Up to 4PPoE (IEEE 802.3bt) – supports powering compatible network devices via the data cable, making it suitable for PoE applications.
Product Highlights
Cat.6A (TIA) for data transmission up to 10 Gbps
Frequency range up to 500 MHz
U/UTP design with 4x2 x AWG24/7
RJ45 8(8) to RJ45 8(8) with blue RJ45 connectors
1:1 pin assignment according to TIA/EIA 568B
PoE (IEEE 802.3af), PoE+ (IEEE 802.3at), and up to 4PPoE (IEEE 802.3bt)
Halogen-free, low-smoke TPE jacket
Flame-retardant (IEC 60332-1), low-smoke (IEC 61034), and halogen-free (IEC 60754-2)
Pure copper conductors and gold-plated contacts
Molded strain relief and latch protection
Outer diameter 6.0 mm, bending radius >30 mm
IP20 rating and ≥750 mating cycles
Ideal for
Ethernet connections in IT and home networks
10-Gigabit Ethernet applications
Patch connections in low-interference network environments
PoE, PoE+, and 4PPoE applications
Applications requiring a flexible and halogen-free patch cable.
The EFB-Elektronik Cat.6A (TIA) U/UTP patch cable enables data transmission speeds of up to 10 Gbps and supports a frequency range of up to 500 MHz. This makes it ideal for high-performance Ethernet connections in IT and home network applications.
The halogen-free TPE jacket combines low-smoke, halogen-free properties with greater flexibility compared to conventional jacket materials. The unshielded U/UTP design allows for simple, cost-effective networking in low-interference environments. Pure copper conductors, gold-plated contacts, and a 1:1 pin assignment (TIA/EIA 568B) ensure reliable signal transmission.
Your benefits at a glance
10 Gbps at up to 500 MHz – high transmission performance for modern Ethernet networks up to Cat.6A (TIA).
Flexible TPE jacket – makes installation and handling easier while offering halogen-free and low-smoke material properties.
Up to 4PPoE (IEEE 802.3bt) – supports powering compatible network devices via the data cable, making it suitable for PoE applications.
Product Highlights
Cat.6A (TIA) for data transmission up to 10 Gbps
Frequency range up to 500 MHz
U/UTP design with 4x2 x AWG24/7
RJ45 8(8) to RJ45 8(8) with blue RJ45 connectors
1:1 pin assignment according to TIA/EIA 568B
PoE (IEEE 802.3af), PoE+ (IEEE 802.3at), and up to 4PPoE (IEEE 802.3bt)
Halogen-free, low-smoke TPE jacket
Flame-retardant (IEC 60332-1), low-smoke (IEC 61034), and halogen-free (IEC 60754-2)
Pure copper conductors and gold-plated contacts
Molded strain relief and latch protection
Outer diameter 6.0 mm, bending radius >30 mm
IP20 rating and ≥750 mating cycles
Ideal for
Ethernet connections in IT and home networks
10-Gigabit Ethernet applications
Patch connections in low-interference network environments
PoE, PoE+, and 4PPoE applications
Applications requiring a flexible and halogen-free patch cable.
| AWG-size: | 24/7 |
|---|---|
| Allocation: | acc. TIA/EIA 568B |
| Anti-kink sleeve: | moulded-on |
| Area of Application: | Industrial Ethernet, Structured cabling |
| Bandwidth: | 500MHz |
| Bending radius: | >30 mm |
| Cable construction: | 4x2 |
| Cable shape: | rund |
| Cable type: | U/UTP |
| Cabling standard: | ANSI/TIA-568, EN50173, ISO/IEC 11801 |
| Category: | 6A (TIA) |
| Colour anti-kink sleeve: | red |
| Colour outer sheath: | red |
| Conductive shield: | No |
| Conductor Material: | Copper |
| Connector: | IEC 60603-7-41 |
| Connector type: | RJ45 standard blue |
| Contacts: | Gold plated |
| Current capacity: | max. 1 A |
| Fire retardant version: | acc. IEC60332-1 |
| Halogen free: | acc. IEC60754-2 |
| Impedance: | 100 |
| Length imprint: | True |
| Locking lever: | True |
| Low smoke: | acc. IEC61034 |
| Material outer sheath: | TPE/LSZH |
| Mating cycles: | ≥750 |
| Model: | unshielded |
| Oil resistant: | no |
| Operating-/ tempering voltage: | max. 50 V DC |
| Operating Temperature: | -20 – 60 °C |
| Outer diameter of the cable: | 6.0 mm |
| Ozone resistance: | No |
| Pin assignment: | 1:1 |
| Printing: | Cat.6A U/UTP 4x2xAWG24/7 TPE ISO/IEC 11801 & EN50173-1 ANSI/TIA-568-C.2 *10Gigabit Ethernet* www.efb-elektronik.de |
| Resistant to chemicals: | False |
| Suitable for degree of protection (IP): | IP20 |
| Test voltage: | 1000 (V DC, 1min) core/core und core/screen |
| Transmission: | 10Gbit |
| Type of connector connection 1: | RJ45 8(8) |
| Type of connector connection 2: | RJ45 8(8) |
| UL approbated: | True |
| AWG-size: | 24/7 |
|---|---|
| Allocation: | acc. TIA/EIA 568B |
| Anti-kink sleeve: | moulded-on |
| Area of Application: | Industrial Ethernet, Structured cabling |
| Bandwidth: | 500MHz |
| Bending radius: | >30 mm |
| Cable construction: | 4x2 |
| Cable shape: | rund |
| Cable type: | U/UTP |
| Cabling standard: | ANSI/TIA-568, EN50173, ISO/IEC 11801 |
| Category: | 6A (TIA) |
| Colour anti-kink sleeve: | red |
| Colour outer sheath: | red |
| Conductive shield: | No |
| Conductor Material: | Copper |
| Connector: | IEC 60603-7-41 |
| Connector type: | RJ45 standard blue |
| Contacts: | Gold plated |
| Current capacity: | max. 1 A |
| Fire retardant version: | acc. IEC60332-1 |
| Halogen free: | acc. IEC60754-2 |
| Impedance: | 100 |
| Length imprint: | True |
| Locking lever: | True |
| Low smoke: | acc. IEC61034 |
| Material outer sheath: | TPE/LSZH |
| Mating cycles: | ≥750 |
| Model: | unshielded |
| Oil resistant: | no |
| Operating-/ tempering voltage: | max. 50 V DC |
| Operating Temperature: | -20 – 60 °C |
| Outer diameter of the cable: | 6.0 mm |
| Ozone resistance: | No |
| Pin assignment: | 1:1 |
| Printing: | Cat.6A U/UTP 4x2xAWG24/7 TPE ISO/IEC 11801 & EN50173-1 ANSI/TIA-568-C.2 *10Gigabit Ethernet* www.efb-elektronik.de |
| Resistant to chemicals: | False |
| Suitable for degree of protection (IP): | IP20 |
| Test voltage: | 1000 (V DC, 1min) core/core und core/screen |
| Transmission: | 10Gbit |
| Type of connector connection 1: | RJ45 8(8) |
| Type of connector connection 2: | RJ45 8(8) |
| UL approbated: | True |
Variants
| Item no. | Name | Length | POE class | Length tolerance | |
|---|---|---|---|---|---|
| K8119RT.0,25 | RJ45 Patch Cord Cat.6A U/UTP TPE 500Mhz superflex red 0.25m | 0.25 m | PoE acc. to IEEE802.3af;PoE+ acc. to IEEE802.3at;4PPoE acc. to IEEE802.3bt | ±5 % | |
| K8119RT.0,5 | RJ45 Patch Cord Cat.6A U/UTP TPE 500Mhz superflex red 0.5m | 0.5 m | PoE acc. to IEEE802.3af;PoE+ acc. to IEEE802.3at;4PPoE acc. to IEEE802.3bt | ±5 % | |
| K8119RT.1 | RJ45 Patch Cord Cat.6A U/UTP TPE 500Mhz superflex red 1m | 1.0 m | PoE acc. to IEEE802.3af;PoE+ acc. to IEEE802.3at;4PPoE acc. to IEEE802.3bt | ±5 % | |
| K8119RT.1,5 | RJ45 Patch Cord Cat.6A U/UTP TPE 500Mhz superflex red 1.5m | 1.5 m | PoE acc. to IEEE802.3af;PoE+ acc. to IEEE802.3at;4PPoE acc. to IEEE802.3bt | ±5 % | |
| K8119RT.10 | RJ45 Patch Cord Cat.6A U/UTP TPE 500Mhz superflex red 10m | 10.0 m | PoE acc. to IEEE802.3af;PoE+ acc. to IEEE802.3at;4PPoE acc. to IEEE802.3bt | ±5 % | |
| K8119RT.15 | RJ45 Patch Cord Cat.6A U/UTP TPE 500Mhz superflex red 15m | 15.0 m | PoE acc. to IEEE802.3af;PoE+ acc. to IEEE802.3at;4PPoE acc. to IEEE802.3bt | ±5 % | |
| K8119RT.2 | RJ45 Patch Cord Cat.6A U/UTP TPE 500Mhz superflex red 2m | 2.0 m | PoE acc. to IEEE802.3af;PoE+ acc. to IEEE802.3at;4PPoE acc. to IEEE802.3bt | ±5 % | |
| K8119RT.3 | RJ45 Patch Cord Cat.6A U/UTP TPE 500Mhz superflex red 3m | 3.0 m | PoE acc. to IEEE802.3af;PoE+ acc. to IEEE802.3at;4PPoE acc. to IEEE802.3bt | ±5 % | |
| K8119RT.5 | RJ45 Patch Cord Cat.6A U/UTP TPE 500Mhz superflex red 5m | 5.0 m | PoE acc. to IEEE802.3af;PoE+ acc. to IEEE802.3at;4PPoE acc. to IEEE802.3bt | ±5 % | |
| K8119RT.7,5 | RJ45 Patch Cord Cat.6A U/UTP TPE 500Mhz superflex red 7.5m | 7.5 m | PoE acc. to IEEE802.3af;PoE+ acc. to IEEE802.3at;4PPoE acc. to IEEE802.3bt | ±5 % |