LAN Cat.7 1000 AWG23 S/FTP,4P, CPR Dca, orange, 500m
Content:
1 Stück
LAN Cat.7 1000 AWG23 S/FTP,4P, CPR Dca, orange, 500m
Item number:
MK7101.500-CPR
EAN no.:
4049759201180
Product information for LAN Cat.7 1000 AWG23 S/FTP,4P, CPR Dca, orange, 500m
The Cat.7 LAN installation cable from EFB-Elektronik in orange according to RAL 2003 is designed for high-performance network cabling. The S/FTP structure with LSZH jacket supports stable data connections up to 1000 MHz and is therefore suitable for modern installations with high bandwidth.
• 1000 MHz Cat.7 bandwidth – Supports IEEE 802.3 10Mbit to 10Gbit transmission standards and creates reserves for high-performance networks.
• S/FTP design with braid shielding – Reduces interference and supports stable signal quality in demanding cabling.
• LSZH sheath in orange with RAL 2003 and Euroclass Dca – Combines halogen-free material selection according to EN 60754 with a clearly recognizable colour scheme for structured installations.
The Cat.7 LAN installation cable from EFB-Elektronik is designed as a simplex and uses 23/1 conductors with 8 wires. The structure without reinforcement is aimed at fixed network installations and the dynamic bending radius of 60 mm makes installation easier. The braided shielding supports decoupling against external influences and the LSZH sheath meets the requirements for halogen-free design according to EN 60754. The cable is also intended for PoE according to IEEE802.3af, PoE+ according to IEEE802.3at and 4PPoE according to IEEE802.3bt and is therefore designed for versatile use in structured infrastructures.
Technical details
• Brand: EFB-Elektronik
• Category: 7
• Transmission standards: IEEE 802.3 10Mbit to 10Gbit
• Max. frequency: 1000 MHz
• Cable construction: S/FTP
• PoE: after IEEE802.3af PoE, after IEEE802.3at PoE+, after IEEE802.3bt 4PPoE
• AWG cross-section/number of wires: 23/1
• Number of cores: 8
• Type: simplex
• Sheath material: LSZH
• Sheath colour: orange
• RAL colour: RAL 2003
• Armour: without
• Bend radius (dynamic): 60 mm
• Directive/Regulation: RoHS 2011/65/UE
• Euroclass: Dca
• Halogen-free: according to EN 60754
• Shield over stranding: braid
• 1000 MHz Cat.7 bandwidth – Supports IEEE 802.3 10Mbit to 10Gbit transmission standards and creates reserves for high-performance networks.
• S/FTP design with braid shielding – Reduces interference and supports stable signal quality in demanding cabling.
• LSZH sheath in orange with RAL 2003 and Euroclass Dca – Combines halogen-free material selection according to EN 60754 with a clearly recognizable colour scheme for structured installations.
The Cat.7 LAN installation cable from EFB-Elektronik is designed as a simplex and uses 23/1 conductors with 8 wires. The structure without reinforcement is aimed at fixed network installations and the dynamic bending radius of 60 mm makes installation easier. The braided shielding supports decoupling against external influences and the LSZH sheath meets the requirements for halogen-free design according to EN 60754. The cable is also intended for PoE according to IEEE802.3af, PoE+ according to IEEE802.3at and 4PPoE according to IEEE802.3bt and is therefore designed for versatile use in structured infrastructures.
Technical details
• Brand: EFB-Elektronik
• Category: 7
• Transmission standards: IEEE 802.3 10Mbit to 10Gbit
• Max. frequency: 1000 MHz
• Cable construction: S/FTP
• PoE: after IEEE802.3af PoE, after IEEE802.3at PoE+, after IEEE802.3bt 4PPoE
• AWG cross-section/number of wires: 23/1
• Number of cores: 8
• Type: simplex
• Sheath material: LSZH
• Sheath colour: orange
• RAL colour: RAL 2003
• Armour: without
• Bend radius (dynamic): 60 mm
• Directive/Regulation: RoHS 2011/65/UE
• Euroclass: Dca
• Halogen-free: according to EN 60754
• Shield over stranding: braid
| AWG-size: | 23/1 |
|---|---|
| Armour: | none |
| Bending radius (dynamic): | 60 mm |
| Cable: | EN 50288-4-1 1000, IEC 61156-6 |
| Cable silicone free: | True |
| Cable structure: | S/FTP |
| Cable type: | EFB Cat.7 S/FTP 1000 AWG23 Dca |
| Cabling standards: | EN 50173-1, ISO/IEC 11801 |
| Category: | 7 |
| Characteristic impedance: | 100 ± 5 Ohm |
| Conductor category: | Class 1 = solid |
| Conductor material: | Copper, tinned |
| Core identification: | Colour |
| Core insulation: | Foam-Skin-PE |
| Coupling attenuation: | ≥ 80 dB |
| Diameter conductor: | 0.56 mm |
| Directive/Regulation: | RoHS 2011/65/UE |
| Euro class: | Dca |
| Flame retardant: | acc. to EN 60332-1 |
| Halogen free: | acc. to EN 60754 |
| Harmonised Standard: | EN 50575 |
| Installation standard: | EN 50174 |
| Insulation resistance (500V): | ≥ 2000 MOhm/km |
| Loop resistance: | 191.2 Ohm/km |
| Low smoke: | acc. to EN 61034 |
| Material outer sheath: | LSZH |
| Max. Freuqency: | MHz MHz |
| NVP value: | 76 % |
| Operating capacity: | 43 pF/km |
| Operating temperature, fix: | -20 – 60 °C |
| Operating temperature, flexible: | 0 – 50 °C |
| Operating temperature, storage: | -20 – 60 °C |
| PoE: | acc. to IEEE802.3af PoE, acc. to IEEE802.3at PoE+, acc. to IEEE802.3bt 4PPoE |
| Resistance unbalance: | 3 % |
| Screen over stranding: | braiding |
| Screen over stranding element: | Foil |
| Separation class acc. EN50174-2: | D |
| Stranding element: | Pairs |
| Test voltage DC, 1 min: | 1000 V |
| Transmission standards: | IEEE 802.3 10Mbit bis 10Gbit |
| UV resistant: | no |
Technical properties
| AWG-size: | 23/1 |
|---|---|
| Armour: | none |
| Bending radius (dynamic): | 60 mm |
| Cable: | EN 50288-4-1 1000, IEC 61156-6 |
| Cable silicone free: | True |
| Cable structure: | S/FTP |
| Cable type: | EFB Cat.7 S/FTP 1000 AWG23 Dca |
| Cabling standards: | EN 50173-1, ISO/IEC 11801 |
| Category: | 7 |
| Characteristic impedance: | 100 ± 5 Ohm |
| Conductor category: | Class 1 = solid |
| Conductor material: | Copper, tinned |
| Core identification: | Colour |
| Core insulation: | Foam-Skin-PE |
| Coupling attenuation: | ≥ 80 dB |
| Diameter conductor: | 0.56 mm |
| Directive/Regulation: | RoHS 2011/65/UE |
| Euro class: | Dca |
| Flame retardant: | acc. to EN 60332-1 |
| Halogen free: | acc. to EN 60754 |
| Harmonised Standard: | EN 50575 |
| Installation standard: | EN 50174 |
| Insulation resistance (500V): | ≥ 2000 MOhm/km |
| Loop resistance: | 191.2 Ohm/km |
| Low smoke: | acc. to EN 61034 |
| Material outer sheath: | LSZH |
| Max. Freuqency: | MHz MHz |
| NVP value: | 76 % |
| Operating capacity: | 43 pF/km |
| Operating temperature, fix: | -20 – 60 °C |
| Operating temperature, flexible: | 0 – 50 °C |
| Operating temperature, storage: | -20 – 60 °C |
| PoE: | acc. to IEEE802.3af PoE, acc. to IEEE802.3at PoE+, acc. to IEEE802.3bt 4PPoE |
| Resistance unbalance: | 3 % |
| Screen over stranding: | braiding |
| Screen over stranding element: | Foil |
| Separation class acc. EN50174-2: | D |
| Stranding element: | Pairs |
| Test voltage DC, 1 min: | 1000 V |
| Transmission standards: | IEEE 802.3 10Mbit bis 10Gbit |
| UV resistant: | no |
Variants
| Item no. | Name | Colour outer sheath | Type | Number of cores | RAL colour | Length | Copper weight | Weight | Max. tractive force | Outer diameter approx. | Fire load | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MK7101.1-CPR | LAN Cat.7 1000 AWG 23 S/FTP,4P, CPR Dca, orange | orange | simplex | 8 | RAL 2003 | 1.0 m | 22 kg/km | 58 kg/km | 100 N | 7.4 mm | 590 MJ/km | |
| MK7101.100-CPR | LAN Cat.7 1000 AWG23 S/FTP,4P, CPR Dca, orange, 100m | orange | simplex | 8 | RAL 2003 | 100.0 m | 22 kg/km | 58 kg/km | 100 N | 7.4 mm | 590 MJ/km | |
| MK7101.500-CPR | LAN Cat.7 1000 AWG23 S/FTP,4P, CPR Dca, orange, 500m | orange | simplex | 8 | RAL 2003 | 500.0 m | 22 kg/km | 58 kg/km | 100 N | 7.4 mm | 590 MJ/km |
Product information for LAN Cat.7 1000 AWG23 S/FTP,4P, CPR Dca, orange, 500m
The Cat.7 LAN installation cable from EFB-Elektronik in orange according to RAL 2003 is designed for high-performance network cabling. The S/FTP structure with LSZH jacket supports stable data connections up to 1000 MHz and is therefore suitable for modern installations with high bandwidth.
• 1000 MHz Cat.7 bandwidth – Supports IEEE 802.3 10Mbit to 10Gbit transmission standards and creates reserves for high-performance networks.
• S/FTP design with braid shielding – Reduces interference and supports stable signal quality in demanding cabling.
• LSZH sheath in orange with RAL 2003 and Euroclass Dca – Combines halogen-free material selection according to EN 60754 with a clearly recognizable colour scheme for structured installations.
The Cat.7 LAN installation cable from EFB-Elektronik is designed as a simplex and uses 23/1 conductors with 8 wires. The structure without reinforcement is aimed at fixed network installations and the dynamic bending radius of 60 mm makes installation easier. The braided shielding supports decoupling against external influences and the LSZH sheath meets the requirements for halogen-free design according to EN 60754. The cable is also intended for PoE according to IEEE802.3af, PoE+ according to IEEE802.3at and 4PPoE according to IEEE802.3bt and is therefore designed for versatile use in structured infrastructures.
Technical details
• Brand: EFB-Elektronik
• Category: 7
• Transmission standards: IEEE 802.3 10Mbit to 10Gbit
• Max. frequency: 1000 MHz
• Cable construction: S/FTP
• PoE: after IEEE802.3af PoE, after IEEE802.3at PoE+, after IEEE802.3bt 4PPoE
• AWG cross-section/number of wires: 23/1
• Number of cores: 8
• Type: simplex
• Sheath material: LSZH
• Sheath colour: orange
• RAL colour: RAL 2003
• Armour: without
• Bend radius (dynamic): 60 mm
• Directive/Regulation: RoHS 2011/65/UE
• Euroclass: Dca
• Halogen-free: according to EN 60754
• Shield over stranding: braid
• 1000 MHz Cat.7 bandwidth – Supports IEEE 802.3 10Mbit to 10Gbit transmission standards and creates reserves for high-performance networks.
• S/FTP design with braid shielding – Reduces interference and supports stable signal quality in demanding cabling.
• LSZH sheath in orange with RAL 2003 and Euroclass Dca – Combines halogen-free material selection according to EN 60754 with a clearly recognizable colour scheme for structured installations.
The Cat.7 LAN installation cable from EFB-Elektronik is designed as a simplex and uses 23/1 conductors with 8 wires. The structure without reinforcement is aimed at fixed network installations and the dynamic bending radius of 60 mm makes installation easier. The braided shielding supports decoupling against external influences and the LSZH sheath meets the requirements for halogen-free design according to EN 60754. The cable is also intended for PoE according to IEEE802.3af, PoE+ according to IEEE802.3at and 4PPoE according to IEEE802.3bt and is therefore designed for versatile use in structured infrastructures.
Technical details
• Brand: EFB-Elektronik
• Category: 7
• Transmission standards: IEEE 802.3 10Mbit to 10Gbit
• Max. frequency: 1000 MHz
• Cable construction: S/FTP
• PoE: after IEEE802.3af PoE, after IEEE802.3at PoE+, after IEEE802.3bt 4PPoE
• AWG cross-section/number of wires: 23/1
• Number of cores: 8
• Type: simplex
• Sheath material: LSZH
• Sheath colour: orange
• RAL colour: RAL 2003
• Armour: without
• Bend radius (dynamic): 60 mm
• Directive/Regulation: RoHS 2011/65/UE
• Euroclass: Dca
• Halogen-free: according to EN 60754
• Shield over stranding: braid
| AWG-size: | 23/1 |
|---|---|
| Armour: | none |
| Bending radius (dynamic): | 60 mm |
| Cable: | EN 50288-4-1 1000, IEC 61156-6 |
| Cable silicone free: | True |
| Cable structure: | S/FTP |
| Cable type: | EFB Cat.7 S/FTP 1000 AWG23 Dca |
| Cabling standards: | EN 50173-1, ISO/IEC 11801 |
| Category: | 7 |
| Characteristic impedance: | 100 ± 5 Ohm |
| Conductor category: | Class 1 = solid |
| Conductor material: | Copper, tinned |
| Core identification: | Colour |
| Core insulation: | Foam-Skin-PE |
| Coupling attenuation: | ≥ 80 dB |
| Diameter conductor: | 0.56 mm |
| Directive/Regulation: | RoHS 2011/65/UE |
| Euro class: | Dca |
| Flame retardant: | acc. to EN 60332-1 |
| Halogen free: | acc. to EN 60754 |
| Harmonised Standard: | EN 50575 |
| Installation standard: | EN 50174 |
| Insulation resistance (500V): | ≥ 2000 MOhm/km |
| Loop resistance: | 191.2 Ohm/km |
| Low smoke: | acc. to EN 61034 |
| Material outer sheath: | LSZH |
| Max. Freuqency: | MHz MHz |
| NVP value: | 76 % |
| Operating capacity: | 43 pF/km |
| Operating temperature, fix: | -20 – 60 °C |
| Operating temperature, flexible: | 0 – 50 °C |
| Operating temperature, storage: | -20 – 60 °C |
| PoE: | acc. to IEEE802.3af PoE, acc. to IEEE802.3at PoE+, acc. to IEEE802.3bt 4PPoE |
| Resistance unbalance: | 3 % |
| Screen over stranding: | braiding |
| Screen over stranding element: | Foil |
| Separation class acc. EN50174-2: | D |
| Stranding element: | Pairs |
| Test voltage DC, 1 min: | 1000 V |
| Transmission standards: | IEEE 802.3 10Mbit bis 10Gbit |
| UV resistant: | no |
| AWG-size: | 23/1 |
|---|---|
| Armour: | none |
| Bending radius (dynamic): | 60 mm |
| Cable: | EN 50288-4-1 1000, IEC 61156-6 |
| Cable silicone free: | True |
| Cable structure: | S/FTP |
| Cable type: | EFB Cat.7 S/FTP 1000 AWG23 Dca |
| Cabling standards: | EN 50173-1, ISO/IEC 11801 |
| Category: | 7 |
| Characteristic impedance: | 100 ± 5 Ohm |
| Conductor category: | Class 1 = solid |
| Conductor material: | Copper, tinned |
| Core identification: | Colour |
| Core insulation: | Foam-Skin-PE |
| Coupling attenuation: | ≥ 80 dB |
| Diameter conductor: | 0.56 mm |
| Directive/Regulation: | RoHS 2011/65/UE |
| Euro class: | Dca |
| Flame retardant: | acc. to EN 60332-1 |
| Halogen free: | acc. to EN 60754 |
| Harmonised Standard: | EN 50575 |
| Installation standard: | EN 50174 |
| Insulation resistance (500V): | ≥ 2000 MOhm/km |
| Loop resistance: | 191.2 Ohm/km |
| Low smoke: | acc. to EN 61034 |
| Material outer sheath: | LSZH |
| Max. Freuqency: | MHz MHz |
| NVP value: | 76 % |
| Operating capacity: | 43 pF/km |
| Operating temperature, fix: | -20 – 60 °C |
| Operating temperature, flexible: | 0 – 50 °C |
| Operating temperature, storage: | -20 – 60 °C |
| PoE: | acc. to IEEE802.3af PoE, acc. to IEEE802.3at PoE+, acc. to IEEE802.3bt 4PPoE |
| Resistance unbalance: | 3 % |
| Screen over stranding: | braiding |
| Screen over stranding element: | Foil |
| Separation class acc. EN50174-2: | D |
| Stranding element: | Pairs |
| Test voltage DC, 1 min: | 1000 V |
| Transmission standards: | IEEE 802.3 10Mbit bis 10Gbit |
| UV resistant: | no |
Variants
| Item no. | Name | Colour outer sheath | Type | Number of cores | RAL colour | Length | Copper weight | Weight | Max. tractive force | Outer diameter approx. | Fire load | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| MK7101.1-CPR | LAN Cat.7 1000 AWG 23 S/FTP,4P, CPR Dca, orange | orange | simplex | 8 | RAL 2003 | 1.0 m | 22 kg/km | 58 kg/km | 100 N | 7.4 mm | 590 MJ/km | |
| MK7101.100-CPR | LAN Cat.7 1000 AWG23 S/FTP,4P, CPR Dca, orange, 100m | orange | simplex | 8 | RAL 2003 | 100.0 m | 22 kg/km | 58 kg/km | 100 N | 7.4 mm | 590 MJ/km | |
| MK7101.500-CPR | LAN Cat.7 1000 AWG23 S/FTP,4P, CPR Dca, orange, 500m | orange | simplex | 8 | RAL 2003 | 500.0 m | 22 kg/km | 58 kg/km | 100 N | 7.4 mm | 590 MJ/km |
Safety instructions
Do not use the device if the cable or plug is damaged. This device may only be used in dry environments. Avoid faulty electrical connections. Only use the device within the specified voltage range.
Manufacturer information
EFB-Elektronik GmbH
Striegauer Straße 1
33719 Bielefeld
info@efb-elektronik.de
https://www.efb-elektronik.de/kontakt