Shopping cart

Power Cable CEE7/7 90° - C13 180° with IEC Lock+, black

Power Cable CEE7/7 90° - C13 180°, Black, 1.0 m, 3 x 1.00 mm², IEC Lock+
Item number: EK603SW.1
EAN no.: 5055287014405
Get notified when the product is back in stock:

Enter your email in the field below and we will notify you when the product is back in stock.

Product information for Power Cable CEE7/7 90° - C13 180°, Black, 1.0 m, 3 x 1.00 mm², IEC Lock+

With „IEC Lock+“: prevents accidentally removing of the C13 jack from devices
After connecting, the C13 jack only can be released after sliding back the red latch
10 A / 250 V VDE tested (optional: orange, blue, grey, white)
Suitable for Germany, Belgium, France and further
Other types on request: UK, USA/NEMA, Switzerland, open end

Technical properties

Colour outer sheath: black
Connection 1: Plug with protective contact (type F), right-angled
Connection 2: Cold device plug straight, female
Halogen free: False
Jacket material: Polyvinylchlorid (PVC)
Nominal voltage: 250 V
Number of cores: 3
Oil resistant (acc. EN 60811-2-1): False
Oil resistant (according to EN 60811-404): False
Protective conductor: True
Spiralized cable: False
Temperature resistance: 0 70 °C
With cord switch: False

Variants

Item no. Name Colour outer sheath Degree of protection Length Nominal cross section conductor Outer diameter approx.
EK603SW.1 Power Cable CEE7/7 90° - C13 180°, Black, 1.0 m, 3 x 1.00 mm², IEC Lock+ black IP20 1.0 m 1.0 mm² 7.1 mm
EK603SW.2 Power Cable CEE7/7 90° - C13 180°, Black, 2.0 m, 3 x 1.00 mm², IEC Lock+ black IP20 2.0 m 1.0 mm² 7.1 mm

Safety instructions


Do not block any ventilation openings to prevent components from overheating. Do not operate the appliance beyond the permissible connected loads to prevent overloading and excessive heat generation. Ensure that the device does not overheat during operation. Warning: Danger of electric shocks and short circuits! Ensure proper earthing to avoid electric shocks. Avoid overloading as this can lead to overheating and short circuits. Check that the housing is undamaged and that there are no exposed contacts or bare wires. Ensure that all electrical connections are made correctly and that the ambient conditions comply with the technical specifications. Always keep a sufficient distance from live devices and avoid misuse.

Manufacturer information


EFB-Elektronik GmbH   
Striegauer Straße 1   
33719 Bielefeld   
info@efb-elektronik.de    
https://www.efb-elektronik.de/kontakt