RJ45 Patchkabel S/FTP, Cat.6A,
EFB-Elektronik
RJ45 Patch Cord Cat.6A S/FTP TPE superflex red 3m
Item number:
K5534FRT.3
EAN no.:
4049759135133
Product information for RJ45 Patch Cord Cat.6A S/FTP TPE superflex red 3m
This Cat.6A (TIA) patch cable from EFB-Elektronik transmits data up to 10Gbit. The S/FTP shielding reliably protects against interference and ensures good signal quality. Since it is a Cat.6A (TIA) patch cable, it supports a frequency range of up to 500MHz, which enables high data transmission performance.
• Increase interference immunity in electromagnetically charged environments – double shielding (S/FTP) improves EMC reserve, reduces susceptibility to radiation and stabilizes transmission in parallel cable routing.
• Cover fire protection requirements in compliance with standards – flame-retardant cable behaviour according to IEC60332-1 reduces the spread of fire in the event of a fault and supports compliance with common installation specifications.
• Better visibility and safer evacuation in the event of an emergency after IEC61034 – low smoke development helps to keep escape routes as low-smoke as possible in the event of a fire.
Product Description
The S/FTP network cable has double shielding, which effectively reduces electromagnetic interference. The temperature range of the cable is -20 – 60 °C. The wide range of possible applications is supported by the bending radius of 5 x D. The LSZH jacket is halogen-free and low-smoke. In the event of a fire, it minimizes smoke development and increases indoor safety. It is also oil-resistant.
Technical details
• Cat.6A (TIA)
• Connector: RJ45 8(8) to RJ45 8(8) with RJ45 connectors
• Shielding: S/FTP cable with 4x2 x AWG26/7
• Pinout: 1:1
• Equivalent to PoE class: PoE to IEEE802.3af, PoE+ to IEEE802.3at, and 4PPoE to IEEE802.3bt
• Sheath: LSZH sheath material
• Oil-resistant according to EN 60811-404
• Outer diameter: 6.0 mm
• With an injected anti-kink grommet
• Fire protection: flame-retardant according to IEC60332-1, low-smoke according to IEC61034
• With locking lever protection
• Brand: EFB-Elektronik
• Increase interference immunity in electromagnetically charged environments – double shielding (S/FTP) improves EMC reserve, reduces susceptibility to radiation and stabilizes transmission in parallel cable routing.
• Cover fire protection requirements in compliance with standards – flame-retardant cable behaviour according to IEC60332-1 reduces the spread of fire in the event of a fault and supports compliance with common installation specifications.
• Better visibility and safer evacuation in the event of an emergency after IEC61034 – low smoke development helps to keep escape routes as low-smoke as possible in the event of a fire.
Product Description
The S/FTP network cable has double shielding, which effectively reduces electromagnetic interference. The temperature range of the cable is -20 – 60 °C. The wide range of possible applications is supported by the bending radius of 5 x D. The LSZH jacket is halogen-free and low-smoke. In the event of a fire, it minimizes smoke development and increases indoor safety. It is also oil-resistant.
Technical details
• Cat.6A (TIA)
• Connector: RJ45 8(8) to RJ45 8(8) with RJ45 connectors
• Shielding: S/FTP cable with 4x2 x AWG26/7
• Pinout: 1:1
• Equivalent to PoE class: PoE to IEEE802.3af, PoE+ to IEEE802.3at, and 4PPoE to IEEE802.3bt
• Sheath: LSZH sheath material
• Oil-resistant according to EN 60811-404
• Outer diameter: 6.0 mm
• With an injected anti-kink grommet
• Fire protection: flame-retardant according to IEC60332-1, low-smoke according to IEC61034
• With locking lever protection
• Brand: EFB-Elektronik
| AWG-size: | 26/7 |
|---|---|
| Anti-kink sleeve: | moulded-on |
| Area of Application: | Data center, Industrial Ethernet, Structured cabling |
| Bandwidth: | 500MHz |
| Bending radius: | 5 x D |
| Cable construction: | 4x2 |
| Cable type: | S/FTP |
| Cabling standard: | ANSI/TIA-568-C.2, EN50173, ISO/IEC 11801 |
| Category: | 6A (TIA) |
| Colour anti-kink sleeve: | blue |
| Colour outer sheath: | blue |
| Conductor Material: | Copper |
| Fire retardant version: | acc. IEC60332-1 |
| Locking lever: | True |
| Low smoke: | acc. IEC61034 |
| Material outer sheath: | LSZH |
| Model: | shielded |
| Oil resistant: | acc. EN 60811-404 |
| Operating Temperature: | -20 – 60 °C |
| Outer diameter of the cable: | 6.0 mm |
| Pin assignment: | 1:1 |
| Printing: | Cat.6 S/FTP 4x2xAWG27/7 PIMF ISO/IEC 11801 & EN50173-1 TIA/EIA 568B.2-1 Halogen Free ***Gigabit*** www.efb-elektronik.de |
| Raw cable: | Cat.7 |
| Transmission: | 10Gbit |
| Type of connector connection 1: | RJ45 8(8) |
| Type of connector connection 2: | RJ45 8(8) |
Technical properties
| AWG-size: | 26/7 |
|---|---|
| Anti-kink sleeve: | moulded-on |
| Area of Application: | Data center, Industrial Ethernet, Structured cabling |
| Bandwidth: | 500MHz |
| Bending radius: | 5 x D |
| Cable construction: | 4x2 |
| Cable type: | S/FTP |
| Cabling standard: | ANSI/TIA-568-C.2, EN50173, ISO/IEC 11801 |
| Category: | 6A (TIA) |
| Colour anti-kink sleeve: | blue |
| Colour outer sheath: | blue |
| Conductor Material: | Copper |
| Fire retardant version: | acc. IEC60332-1 |
| Locking lever: | True |
| Low smoke: | acc. IEC61034 |
| Material outer sheath: | LSZH |
| Model: | shielded |
| Oil resistant: | acc. EN 60811-404 |
| Operating Temperature: | -20 – 60 °C |
| Outer diameter of the cable: | 6.0 mm |
| Pin assignment: | 1:1 |
| Printing: | Cat.6 S/FTP 4x2xAWG27/7 PIMF ISO/IEC 11801 & EN50173-1 TIA/EIA 568B.2-1 Halogen Free ***Gigabit*** www.efb-elektronik.de |
| Raw cable: | Cat.7 |
| Transmission: | 10Gbit |
| Type of connector connection 1: | RJ45 8(8) |
| Type of connector connection 2: | RJ45 8(8) |
Variants
| Item no. | Name | Length | POE class | |
|---|---|---|---|---|
| K5534FBL.5 | RJ45 Patch cable S/FTP, Cat.6A, TPE superflex, 5m, blue | 5.0 m | PoE nach IEEE802.3af;PoE+ nach IEEE802.3at;4PPoE nach IEEE802.3bt | |
| K5534FGE.1 | RJ45 Patch cable S/FTP, Cat.6A, TPE superflex, 1m, yellow | 1.0 m | keine | |
| K5534FGN.10 | RJ45 Patch Cord Cat.6A S/FTP TPE superflex green 10m | 10.0 m | PoE nach IEEE802.3af;PoE+ nach IEEE802.3at;4PPoE nach IEEE802.3bt | |
| K5534FGR.1 | RJ45 Patch Cord Cat.6A S/FTP TPE superflex grey 1m | 1.0 m | PoE nach IEEE802.3af;PoE+ nach IEEE802.3at;4PPoE nach IEEE802.3bt | |
| K5534FRT.10 | RJ45 Patch Cord Cat.6A S/FTP TPE superflex red 10m | 10.0 m | keine | |
| K5534FRT.3 | RJ45 Patch Cord Cat.6A S/FTP TPE superflex red 3m | 3.0 m | PoE nach IEEE802.3af;PoE+ nach IEEE802.3at;4PPoE nach IEEE802.3bt | |
| K5534FRT.7,5 | RJ45 Patch Cord Cat.6A S/FTP TPE superflex red 7,5m | 7.5 m | keine |
Product information for RJ45 Patch Cord Cat.6A S/FTP TPE superflex red 3m
This Cat.6A (TIA) patch cable from EFB-Elektronik transmits data up to 10Gbit. The S/FTP shielding reliably protects against interference and ensures good signal quality. Since it is a Cat.6A (TIA) patch cable, it supports a frequency range of up to 500MHz, which enables high data transmission performance.
• Increase interference immunity in electromagnetically charged environments – double shielding (S/FTP) improves EMC reserve, reduces susceptibility to radiation and stabilizes transmission in parallel cable routing.
• Cover fire protection requirements in compliance with standards – flame-retardant cable behaviour according to IEC60332-1 reduces the spread of fire in the event of a fault and supports compliance with common installation specifications.
• Better visibility and safer evacuation in the event of an emergency after IEC61034 – low smoke development helps to keep escape routes as low-smoke as possible in the event of a fire.
Product Description
The S/FTP network cable has double shielding, which effectively reduces electromagnetic interference. The temperature range of the cable is -20 – 60 °C. The wide range of possible applications is supported by the bending radius of 5 x D. The LSZH jacket is halogen-free and low-smoke. In the event of a fire, it minimizes smoke development and increases indoor safety. It is also oil-resistant.
Technical details
• Cat.6A (TIA)
• Connector: RJ45 8(8) to RJ45 8(8) with RJ45 connectors
• Shielding: S/FTP cable with 4x2 x AWG26/7
• Pinout: 1:1
• Equivalent to PoE class: PoE to IEEE802.3af, PoE+ to IEEE802.3at, and 4PPoE to IEEE802.3bt
• Sheath: LSZH sheath material
• Oil-resistant according to EN 60811-404
• Outer diameter: 6.0 mm
• With an injected anti-kink grommet
• Fire protection: flame-retardant according to IEC60332-1, low-smoke according to IEC61034
• With locking lever protection
• Brand: EFB-Elektronik
• Increase interference immunity in electromagnetically charged environments – double shielding (S/FTP) improves EMC reserve, reduces susceptibility to radiation and stabilizes transmission in parallel cable routing.
• Cover fire protection requirements in compliance with standards – flame-retardant cable behaviour according to IEC60332-1 reduces the spread of fire in the event of a fault and supports compliance with common installation specifications.
• Better visibility and safer evacuation in the event of an emergency after IEC61034 – low smoke development helps to keep escape routes as low-smoke as possible in the event of a fire.
Product Description
The S/FTP network cable has double shielding, which effectively reduces electromagnetic interference. The temperature range of the cable is -20 – 60 °C. The wide range of possible applications is supported by the bending radius of 5 x D. The LSZH jacket is halogen-free and low-smoke. In the event of a fire, it minimizes smoke development and increases indoor safety. It is also oil-resistant.
Technical details
• Cat.6A (TIA)
• Connector: RJ45 8(8) to RJ45 8(8) with RJ45 connectors
• Shielding: S/FTP cable with 4x2 x AWG26/7
• Pinout: 1:1
• Equivalent to PoE class: PoE to IEEE802.3af, PoE+ to IEEE802.3at, and 4PPoE to IEEE802.3bt
• Sheath: LSZH sheath material
• Oil-resistant according to EN 60811-404
• Outer diameter: 6.0 mm
• With an injected anti-kink grommet
• Fire protection: flame-retardant according to IEC60332-1, low-smoke according to IEC61034
• With locking lever protection
• Brand: EFB-Elektronik
| AWG-size: | 26/7 |
|---|---|
| Anti-kink sleeve: | moulded-on |
| Area of Application: | Data center, Industrial Ethernet, Structured cabling |
| Bandwidth: | 500MHz |
| Bending radius: | 5 x D |
| Cable construction: | 4x2 |
| Cable type: | S/FTP |
| Cabling standard: | ANSI/TIA-568-C.2, EN50173, ISO/IEC 11801 |
| Category: | 6A (TIA) |
| Colour anti-kink sleeve: | blue |
| Colour outer sheath: | blue |
| Conductor Material: | Copper |
| Fire retardant version: | acc. IEC60332-1 |
| Locking lever: | True |
| Low smoke: | acc. IEC61034 |
| Material outer sheath: | LSZH |
| Model: | shielded |
| Oil resistant: | acc. EN 60811-404 |
| Operating Temperature: | -20 – 60 °C |
| Outer diameter of the cable: | 6.0 mm |
| Pin assignment: | 1:1 |
| Printing: | Cat.6 S/FTP 4x2xAWG27/7 PIMF ISO/IEC 11801 & EN50173-1 TIA/EIA 568B.2-1 Halogen Free ***Gigabit*** www.efb-elektronik.de |
| Raw cable: | Cat.7 |
| Transmission: | 10Gbit |
| Type of connector connection 1: | RJ45 8(8) |
| Type of connector connection 2: | RJ45 8(8) |
| AWG-size: | 26/7 |
|---|---|
| Anti-kink sleeve: | moulded-on |
| Area of Application: | Data center, Industrial Ethernet, Structured cabling |
| Bandwidth: | 500MHz |
| Bending radius: | 5 x D |
| Cable construction: | 4x2 |
| Cable type: | S/FTP |
| Cabling standard: | ANSI/TIA-568-C.2, EN50173, ISO/IEC 11801 |
| Category: | 6A (TIA) |
| Colour anti-kink sleeve: | blue |
| Colour outer sheath: | blue |
| Conductor Material: | Copper |
| Fire retardant version: | acc. IEC60332-1 |
| Locking lever: | True |
| Low smoke: | acc. IEC61034 |
| Material outer sheath: | LSZH |
| Model: | shielded |
| Oil resistant: | acc. EN 60811-404 |
| Operating Temperature: | -20 – 60 °C |
| Outer diameter of the cable: | 6.0 mm |
| Pin assignment: | 1:1 |
| Printing: | Cat.6 S/FTP 4x2xAWG27/7 PIMF ISO/IEC 11801 & EN50173-1 TIA/EIA 568B.2-1 Halogen Free ***Gigabit*** www.efb-elektronik.de |
| Raw cable: | Cat.7 |
| Transmission: | 10Gbit |
| Type of connector connection 1: | RJ45 8(8) |
| Type of connector connection 2: | RJ45 8(8) |
Variants
| Item no. | Name | Length | POE class | |
|---|---|---|---|---|
| K5534FBL.5 | RJ45 Patch cable S/FTP, Cat.6A, TPE superflex, 5m, blue | 5.0 m | PoE nach IEEE802.3af;PoE+ nach IEEE802.3at;4PPoE nach IEEE802.3bt | |
| K5534FGE.1 | RJ45 Patch cable S/FTP, Cat.6A, TPE superflex, 1m, yellow | 1.0 m | keine | |
| K5534FGN.10 | RJ45 Patch Cord Cat.6A S/FTP TPE superflex green 10m | 10.0 m | PoE nach IEEE802.3af;PoE+ nach IEEE802.3at;4PPoE nach IEEE802.3bt | |
| K5534FGR.1 | RJ45 Patch Cord Cat.6A S/FTP TPE superflex grey 1m | 1.0 m | PoE nach IEEE802.3af;PoE+ nach IEEE802.3at;4PPoE nach IEEE802.3bt | |
| K5534FRT.10 | RJ45 Patch Cord Cat.6A S/FTP TPE superflex red 10m | 10.0 m | keine | |
| K5534FRT.3 | RJ45 Patch Cord Cat.6A S/FTP TPE superflex red 3m | 3.0 m | PoE nach IEEE802.3af;PoE+ nach IEEE802.3at;4PPoE nach IEEE802.3bt | |
| K5534FRT.7,5 | RJ45 Patch Cord Cat.6A S/FTP TPE superflex red 7,5m | 7.5 m | keine |
Manufacturer information
EFB-Elektronik GmbH
Striegauer Straße 1
33719 Bielefeld
info@efb-elektronik.de
https://www.efb-elektronik.de/kontakt