INFRALAN® Cat.7A 1250 AWG22 S/FTP 4P, CPR Dca 25Gbit/s ready yellow RAL1021
INFRALAN
Content:
1 Meter
INFRALAN® Cat.7A 1250 AWG22 S/FTP 4P, CPR Dca 25Gbit/s ready yellow RAL1021
Item number:
999833.1-CPR
EAN no.:
4049759320676
Product information for INFRALAN® Cat.7A 1250 AWG22 S/FTP 4P, CPR Dca 25Gbit/s ready yellow RAL1021
The INFRALAN® Cat.7A 1250 AWG22 S/FTP 4P is designed as a Cat.7A S/FTP halogen-free installation cable in yellow for high-performance network cabling. The design supports stable data connections up to 1250 MHz and is therefore suitable for modern installations with high bandwidth.
• 1250 MHz Cat.7A bandwidth with transmission standards from IEEE 802.3 10Mbit to 25Gbit – Creates high reserves for high-performance networks with extended data throughput.
• S/FTP setup with foil and braid shielding – Reduces interference and supports stable signal quality in demanding cabling.
• LSZH sheath in yellow with RAL 1021 and Euroclass Dca – Is halogen-free according to EN 60754-1/2, complies with RoHS 2011/65/UE and complements the installation with a contemporary choice of materials.
The cable is designed as a simplex and uses 22/1 conductors with 8 wires. The dynamic bending radius of 40 mm makes installation easier. The version without reinforcement is aimed at structured network environments. The shielding of foil and braid supports decoupling from external influences and the design is intended for PoE according to IEEE802.3af, PoE+ according to IEEE802.3at and 4PPoE according to IEEE802.3bt.
Technical details
• Brand: INFRALAN
• Category: 7A
• Transmission standards: IEEE 802.3 10Mbit to 25Gbit
• Max. frequency: 1250 MHz
• Cable construction: S/FTP
• PoE: after IEEE802.3af PoE, after IEEE802.3at PoE+, after IEEE802.3bt 4PPoE
• AWG cross-section/number of wires: 22/1
• Number of cores: 8
• Type: simplex
• Sheath material: LSZH
• Sheath colour: Yellow
• RAL colour: RAL 1021
• Armour: without
• Bend radius (dynamic): 40 mm
• Directive/Regulation: RoHS 2011/65/UE
• Euroclass: Dca
• Halogen-free: according to EN 60754-1/2
• Shield over stranding: foil + braid
• 1250 MHz Cat.7A bandwidth with transmission standards from IEEE 802.3 10Mbit to 25Gbit – Creates high reserves for high-performance networks with extended data throughput.
• S/FTP setup with foil and braid shielding – Reduces interference and supports stable signal quality in demanding cabling.
• LSZH sheath in yellow with RAL 1021 and Euroclass Dca – Is halogen-free according to EN 60754-1/2, complies with RoHS 2011/65/UE and complements the installation with a contemporary choice of materials.
The cable is designed as a simplex and uses 22/1 conductors with 8 wires. The dynamic bending radius of 40 mm makes installation easier. The version without reinforcement is aimed at structured network environments. The shielding of foil and braid supports decoupling from external influences and the design is intended for PoE according to IEEE802.3af, PoE+ according to IEEE802.3at and 4PPoE according to IEEE802.3bt.
Technical details
• Brand: INFRALAN
• Category: 7A
• Transmission standards: IEEE 802.3 10Mbit to 25Gbit
• Max. frequency: 1250 MHz
• Cable construction: S/FTP
• PoE: after IEEE802.3af PoE, after IEEE802.3at PoE+, after IEEE802.3bt 4PPoE
• AWG cross-section/number of wires: 22/1
• Number of cores: 8
• Type: simplex
• Sheath material: LSZH
• Sheath colour: Yellow
• RAL colour: RAL 1021
• Armour: without
• Bend radius (dynamic): 40 mm
• Directive/Regulation: RoHS 2011/65/UE
• Euroclass: Dca
• Halogen-free: according to EN 60754-1/2
• Shield over stranding: foil + braid
| AWG-size: | 22/1 |
|---|---|
| Armour: | none |
| Bending radius (dynamic): | 40 mm |
| Cable: | EN 50288-4-1 1250, IEC 61156-6 |
| Cable silicone free: | True |
| Cable structure: | S/FTP |
| Cable type: | EFB Cat.7A S/FTP 1250 AWG22 Dca |
| Cabling standards: | EN 50173-1, ISO/IEC 11801 |
| Category: | 7A |
| Characteristic impedance: | 100 ± 5 Ohm |
| Conductor category: | Class 1 = solid |
| Conductor material: | Copper, bare |
| Core identification: | Colour |
| Core insulation: | Foam-Skin-PE |
| Coupling attenuation: | ≥ 80 dB |
| Diameter conductor: | 0.62 mm |
| Directive/Regulation: | RoHS 2011/65/UE |
| Euro class: | Dca |
| Flame retardant: | acc. to EN 60332-1 |
| Halogen free: | acc. to EN 60754-1/2 |
| Harmonised Standard: | EN 50575 |
| Installation standard: | EN 50174 |
| Insulation resistance (500V): | ≥ 5000 MOhm/km |
| Loop resistance: | 140 Ohm/km |
| Low smoke: | acc. to EN 61034 |
| Material outer sheath: | LSZH |
| Max. Freuqency: | MHz MHz |
| NVP value: | 74 % |
| Operating capacity: | 43 pF/km |
| Operating temperature, fix: | -15 – 75 °C |
| Operating temperature, flexible: | 0 – 50 °C |
| Operating temperature, storage: | -20 – 60 °C |
| PoE: | acc. to IEEE802.3af PoE, acc. to IEEE802.3at PoE+, acc. to IEEE802.3bt 4PPoE |
| Resistance unbalance: | 2 % |
| Screen over stranding: | foil + braid |
| Screen over stranding element: | Braiding |
| Separation class acc. EN50174-2: | D |
| Stranding element: | Pairs |
| Test voltage DC, 1 min: | 1000 V |
| Transmission standards: | IEEE 802.3 10Mbit bis 25Gbit |
| UV resistant: | Nein |
Technical properties
| AWG-size: | 22/1 |
|---|---|
| Armour: | none |
| Bending radius (dynamic): | 40 mm |
| Cable: | EN 50288-4-1 1250, IEC 61156-6 |
| Cable silicone free: | True |
| Cable structure: | S/FTP |
| Cable type: | EFB Cat.7A S/FTP 1250 AWG22 Dca |
| Cabling standards: | EN 50173-1, ISO/IEC 11801 |
| Category: | 7A |
| Characteristic impedance: | 100 ± 5 Ohm |
| Conductor category: | Class 1 = solid |
| Conductor material: | Copper, bare |
| Core identification: | Colour |
| Core insulation: | Foam-Skin-PE |
| Coupling attenuation: | ≥ 80 dB |
| Diameter conductor: | 0.62 mm |
| Directive/Regulation: | RoHS 2011/65/UE |
| Euro class: | Dca |
| Flame retardant: | acc. to EN 60332-1 |
| Halogen free: | acc. to EN 60754-1/2 |
| Harmonised Standard: | EN 50575 |
| Installation standard: | EN 50174 |
| Insulation resistance (500V): | ≥ 5000 MOhm/km |
| Loop resistance: | 140 Ohm/km |
| Low smoke: | acc. to EN 61034 |
| Material outer sheath: | LSZH |
| Max. Freuqency: | MHz MHz |
| NVP value: | 74 % |
| Operating capacity: | 43 pF/km |
| Operating temperature, fix: | -15 – 75 °C |
| Operating temperature, flexible: | 0 – 50 °C |
| Operating temperature, storage: | -20 – 60 °C |
| PoE: | acc. to IEEE802.3af PoE, acc. to IEEE802.3at PoE+, acc. to IEEE802.3bt 4PPoE |
| Resistance unbalance: | 2 % |
| Screen over stranding: | foil + braid |
| Screen over stranding element: | Braiding |
| Separation class acc. EN50174-2: | D |
| Stranding element: | Pairs |
| Test voltage DC, 1 min: | 1000 V |
| Transmission standards: | IEEE 802.3 10Mbit bis 25Gbit |
| UV resistant: | Nein |
Variants
| Item no. | Name | Length | Type | Number of cores | Colour outer sheath | RAL colour | Copper weight | Weight | Max. tractive force | Outer diameter approx. | Fire load | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 999833.1-CPR | INFRALAN® Cat.7A 1250 AWG22 S/FTP 4P, CPR Dca 25Gbit/s ready yellow RAL1021 | 1.00 m | simplex | 8 | yellow | RAL 1021 | 27.4 kg/km | 64 kg/km | 110 N | 8 mm | 640 MJ/km | |
| 999833.100-CPR | INFRALAN® Cat.7A 1250 AWG22 S/FTP 4P, CPR Dca 25Gbit/s ready yellow RAL1021 | 100.0 m | simplex | 8 | yellow | RAL 1021 | 27.4 kg/km | 64 kg/km | 110 N | 8 mm | 640 MJ/km | |
| 999833.500-CPR | INFRALAN® Cat.7A 1250 AWG22 S/FTP 4P, CPR Dca 25Gbit/s ready yellow RAL1021 | 500.0 m | simplex | 8 | yellow | RAL 1021 | 27.4 kg/km | 64 kg/km | 110 N | 8 mm | 640 MJ/km |
Product information for INFRALAN® Cat.7A 1250 AWG22 S/FTP 4P, CPR Dca 25Gbit/s ready yellow RAL1021
The INFRALAN® Cat.7A 1250 AWG22 S/FTP 4P is designed as a Cat.7A S/FTP halogen-free installation cable in yellow for high-performance network cabling. The design supports stable data connections up to 1250 MHz and is therefore suitable for modern installations with high bandwidth.
• 1250 MHz Cat.7A bandwidth with transmission standards from IEEE 802.3 10Mbit to 25Gbit – Creates high reserves for high-performance networks with extended data throughput.
• S/FTP setup with foil and braid shielding – Reduces interference and supports stable signal quality in demanding cabling.
• LSZH sheath in yellow with RAL 1021 and Euroclass Dca – Is halogen-free according to EN 60754-1/2, complies with RoHS 2011/65/UE and complements the installation with a contemporary choice of materials.
The cable is designed as a simplex and uses 22/1 conductors with 8 wires. The dynamic bending radius of 40 mm makes installation easier. The version without reinforcement is aimed at structured network environments. The shielding of foil and braid supports decoupling from external influences and the design is intended for PoE according to IEEE802.3af, PoE+ according to IEEE802.3at and 4PPoE according to IEEE802.3bt.
Technical details
• Brand: INFRALAN
• Category: 7A
• Transmission standards: IEEE 802.3 10Mbit to 25Gbit
• Max. frequency: 1250 MHz
• Cable construction: S/FTP
• PoE: after IEEE802.3af PoE, after IEEE802.3at PoE+, after IEEE802.3bt 4PPoE
• AWG cross-section/number of wires: 22/1
• Number of cores: 8
• Type: simplex
• Sheath material: LSZH
• Sheath colour: Yellow
• RAL colour: RAL 1021
• Armour: without
• Bend radius (dynamic): 40 mm
• Directive/Regulation: RoHS 2011/65/UE
• Euroclass: Dca
• Halogen-free: according to EN 60754-1/2
• Shield over stranding: foil + braid
• 1250 MHz Cat.7A bandwidth with transmission standards from IEEE 802.3 10Mbit to 25Gbit – Creates high reserves for high-performance networks with extended data throughput.
• S/FTP setup with foil and braid shielding – Reduces interference and supports stable signal quality in demanding cabling.
• LSZH sheath in yellow with RAL 1021 and Euroclass Dca – Is halogen-free according to EN 60754-1/2, complies with RoHS 2011/65/UE and complements the installation with a contemporary choice of materials.
The cable is designed as a simplex and uses 22/1 conductors with 8 wires. The dynamic bending radius of 40 mm makes installation easier. The version without reinforcement is aimed at structured network environments. The shielding of foil and braid supports decoupling from external influences and the design is intended for PoE according to IEEE802.3af, PoE+ according to IEEE802.3at and 4PPoE according to IEEE802.3bt.
Technical details
• Brand: INFRALAN
• Category: 7A
• Transmission standards: IEEE 802.3 10Mbit to 25Gbit
• Max. frequency: 1250 MHz
• Cable construction: S/FTP
• PoE: after IEEE802.3af PoE, after IEEE802.3at PoE+, after IEEE802.3bt 4PPoE
• AWG cross-section/number of wires: 22/1
• Number of cores: 8
• Type: simplex
• Sheath material: LSZH
• Sheath colour: Yellow
• RAL colour: RAL 1021
• Armour: without
• Bend radius (dynamic): 40 mm
• Directive/Regulation: RoHS 2011/65/UE
• Euroclass: Dca
• Halogen-free: according to EN 60754-1/2
• Shield over stranding: foil + braid
| AWG-size: | 22/1 |
|---|---|
| Armour: | none |
| Bending radius (dynamic): | 40 mm |
| Cable: | EN 50288-4-1 1250, IEC 61156-6 |
| Cable silicone free: | True |
| Cable structure: | S/FTP |
| Cable type: | EFB Cat.7A S/FTP 1250 AWG22 Dca |
| Cabling standards: | EN 50173-1, ISO/IEC 11801 |
| Category: | 7A |
| Characteristic impedance: | 100 ± 5 Ohm |
| Conductor category: | Class 1 = solid |
| Conductor material: | Copper, bare |
| Core identification: | Colour |
| Core insulation: | Foam-Skin-PE |
| Coupling attenuation: | ≥ 80 dB |
| Diameter conductor: | 0.62 mm |
| Directive/Regulation: | RoHS 2011/65/UE |
| Euro class: | Dca |
| Flame retardant: | acc. to EN 60332-1 |
| Halogen free: | acc. to EN 60754-1/2 |
| Harmonised Standard: | EN 50575 |
| Installation standard: | EN 50174 |
| Insulation resistance (500V): | ≥ 5000 MOhm/km |
| Loop resistance: | 140 Ohm/km |
| Low smoke: | acc. to EN 61034 |
| Material outer sheath: | LSZH |
| Max. Freuqency: | MHz MHz |
| NVP value: | 74 % |
| Operating capacity: | 43 pF/km |
| Operating temperature, fix: | -15 – 75 °C |
| Operating temperature, flexible: | 0 – 50 °C |
| Operating temperature, storage: | -20 – 60 °C |
| PoE: | acc. to IEEE802.3af PoE, acc. to IEEE802.3at PoE+, acc. to IEEE802.3bt 4PPoE |
| Resistance unbalance: | 2 % |
| Screen over stranding: | foil + braid |
| Screen over stranding element: | Braiding |
| Separation class acc. EN50174-2: | D |
| Stranding element: | Pairs |
| Test voltage DC, 1 min: | 1000 V |
| Transmission standards: | IEEE 802.3 10Mbit bis 25Gbit |
| UV resistant: | Nein |
| AWG-size: | 22/1 |
|---|---|
| Armour: | none |
| Bending radius (dynamic): | 40 mm |
| Cable: | EN 50288-4-1 1250, IEC 61156-6 |
| Cable silicone free: | True |
| Cable structure: | S/FTP |
| Cable type: | EFB Cat.7A S/FTP 1250 AWG22 Dca |
| Cabling standards: | EN 50173-1, ISO/IEC 11801 |
| Category: | 7A |
| Characteristic impedance: | 100 ± 5 Ohm |
| Conductor category: | Class 1 = solid |
| Conductor material: | Copper, bare |
| Core identification: | Colour |
| Core insulation: | Foam-Skin-PE |
| Coupling attenuation: | ≥ 80 dB |
| Diameter conductor: | 0.62 mm |
| Directive/Regulation: | RoHS 2011/65/UE |
| Euro class: | Dca |
| Flame retardant: | acc. to EN 60332-1 |
| Halogen free: | acc. to EN 60754-1/2 |
| Harmonised Standard: | EN 50575 |
| Installation standard: | EN 50174 |
| Insulation resistance (500V): | ≥ 5000 MOhm/km |
| Loop resistance: | 140 Ohm/km |
| Low smoke: | acc. to EN 61034 |
| Material outer sheath: | LSZH |
| Max. Freuqency: | MHz MHz |
| NVP value: | 74 % |
| Operating capacity: | 43 pF/km |
| Operating temperature, fix: | -15 – 75 °C |
| Operating temperature, flexible: | 0 – 50 °C |
| Operating temperature, storage: | -20 – 60 °C |
| PoE: | acc. to IEEE802.3af PoE, acc. to IEEE802.3at PoE+, acc. to IEEE802.3bt 4PPoE |
| Resistance unbalance: | 2 % |
| Screen over stranding: | foil + braid |
| Screen over stranding element: | Braiding |
| Separation class acc. EN50174-2: | D |
| Stranding element: | Pairs |
| Test voltage DC, 1 min: | 1000 V |
| Transmission standards: | IEEE 802.3 10Mbit bis 25Gbit |
| UV resistant: | Nein |
Variants
| Item no. | Name | Length | Type | Number of cores | Colour outer sheath | RAL colour | Copper weight | Weight | Max. tractive force | Outer diameter approx. | Fire load | |
|---|---|---|---|---|---|---|---|---|---|---|---|---|
| 999833.1-CPR | INFRALAN® Cat.7A 1250 AWG22 S/FTP 4P, CPR Dca 25Gbit/s ready yellow RAL1021 | 1.00 m | simplex | 8 | yellow | RAL 1021 | 27.4 kg/km | 64 kg/km | 110 N | 8 mm | 640 MJ/km | |
| 999833.100-CPR | INFRALAN® Cat.7A 1250 AWG22 S/FTP 4P, CPR Dca 25Gbit/s ready yellow RAL1021 | 100.0 m | simplex | 8 | yellow | RAL 1021 | 27.4 kg/km | 64 kg/km | 110 N | 8 mm | 640 MJ/km | |
| 999833.500-CPR | INFRALAN® Cat.7A 1250 AWG22 S/FTP 4P, CPR Dca 25Gbit/s ready yellow RAL1021 | 500.0 m | simplex | 8 | yellow | RAL 1021 | 27.4 kg/km | 64 kg/km | 110 N | 8 mm | 640 MJ/km |
Safety instructions
Do not use the device if the cable or plug is damaged. This device may only be used in dry environments. Avoid faulty electrical connections. Only use the device within the specified voltage range.
Manufacturer information
EFB-Elektronik GmbH
Striegauer Str. 1
33719 Bielefeld
info@efb-elektronik.de
https://www.efb-elektronik.de