INFRALAN® Verlegekabel U/UTP Cat.6A 500MHz
INFRALAN® Cat.6A 500 AWG23 U/UTP 4P CPR,B2ca, RAL5015 blau 305m
Item number:
99960.305-CPR
EAN no.:
4049759320645
Product information for INFRALAN® Cat.6A 500 AWG23 U/UTP 4P CPR,B2ca, RAL5015 blau 305m
The INFRALAN® U/UTP Cat.6A installation cable is designed for transmissions up to 500MHz and complies with Cat.6A. With this cable, transmission rates of up to 10Gbit Ethernet are possible. Due to the small outer diameter of only 6.6 mm, the cable is also suitable for feed-throughs in narrow cable ducts. Thanks to the B2ca standard according to the Construction Products Regulation and its cable structure of 4x2xAWG23/1, the cable can be used in all areas of installation in buildings.
Areas of application:
Primary (Campus)
Secondary (Riser)
Tertiary (Horizontal)
Areas of application:
Primary (Campus)
Secondary (Riser)
Tertiary (Horizontal)
Technical properties
| AWG-size: | 23/1 |
|---|---|
| Bending radius (dynamic): | 65 mm |
| Bending radius (static): | 65 mm |
| Cable: | IEC 61156-5 |
| Cable silicone free: | True |
| Cable structure: | U/UTP |
| Cabling standards: |
EN 50173-1 ISO/IEC 11801 |
| Capacity to earth: | 330 pF/km |
| Category: | 6A (IEC) |
| Characteristic impedance: | 100 ± 15 |
| Conductor category: | Class 1 = solid |
| Conductor material: | Cu, blank |
| Core identification: | Colour |
| Core insulation: | Foam-Skin-PE |
| Coupling attenuation: | ≥ 50 dB |
| Diameter conductor: | 0.57 mm |
| Directive/Regulation: |
REACH 1907/2006/EC RoHS 2011/65/UE |
| Euro class: | B2ca |
| Flame retardant: |
According to IEC/EN 60332-1-2 According to IEC/EN 60332-3-24 |
| Halogen free: | acc. EN 60754-1/2 |
| Harmonised Standard: | EN 50575 |
| Installation standard: | EN 50174 |
| Insulation resistance (500V): | ≥ 5000 MOhm/km |
| Jacket material: | LSZH |
| Loop resistance: | 164 Ohm/km |
| Low smoke: | acc. EN 61034-2 |
| Max. frequency: | 500 MHz |
| NVP value: | 68.2 % |
| Nominal cross section conductor: | 0.26 mm² |
| Operating temperature, fix: | -15 – 75 °C |
| Operating temperature, flexible: | 0 – 60 °C |
| Operating temperature, storage: | -15 – 75 °C |
| PoE: |
acc. to IEEE802.3af PoE acc. to IEEE802.3at PoE+ acc. to IEEE802.3bt 4PPoE |
| Resistance unbalance: | 5 % |
| Screen over stranding: | without |
| Screen over stranding element: | without |
| Separation class acc. EN50174-2: | C |
| Stranding element: | Pairs |
| Test voltage DC, 1 min: | 500 V |
| Transmission standards: | IEEE 802.3 10Mbit to 10Gbit |
| UV resistant: | no |
Safety instructions
Do not use the device if the cable or plug is damaged. This device may only be used in dry environments. Avoid faulty electrical connections. Only use the device within the specified voltage range.