CAT6a Patchcable CAT7 Rawcable WHITE
RJ45 Patch Cable CAT7 Raw Cable WHITE 5m S/FTP PIMF Network Cable LAN DSL
Item number:
EC020200139
EAN no.:
4049759289874
Product information for RJ45 Patch Cable CAT7 Raw Cable WHITE 5m S/FTP PIMF Network Cable LAN DSL
Cat.7 cable: more data through the wire
The Cat.7 ethernet cable is basically an upgrade to the Cat.6A cable: The Cat.6A network cable is equipped with a Cat.7 raw cable from EFB-Elektronik. As a result, it is capable of an operating frequency of up to 600 MHz and a transmission speed of up to 10 Gbit/s. In contrast, the Cat.6A raw cable has an operating frequency of 500 MHz. Due to the increased frequency, the Cat.7 network cable can handle significantly more data traffic.
The halogen-free outer jacket of the Cat.7 cable provides additional safety. The patch cords are produced with a Cat.7 raw cable to ensure the highest possible performance. They are perfect for use in high-speed networks and for connecting routers, switches, lighting systems, digital displays, computers or any of the many new IoT devices. The Cat.7 network cable with CAT.6a plug shows its strength best when used in conjunction with the EFB-Elektronik wall plate and the EFB-Elektronik patch panel. These products can easily handle the demanding standards of a high-speed environment that a Cat.7 ethernet cable deployment creates. Cat.7 cables are used, among other things, in professional IT networks and in media technology, where large amounts of data have to be transmitted reliably.
Cat.7 ethernet cable with gold contacts in the CAT.6A RJ45 connector
Each Cat.7 cablepair within the Cat.7 patch cables is individually shielded in metal foil (PIMF). This makes these cables particularly suitable for interference-free data transmission. Due to its kink and jack protection, the high-quality, shielded RJ45 plug with gold-plated contacts can survive a high number of mating cycles undamaged.
Your devices will remain connected to the Internet even if they are moved unintentionally: These Cat.7 patch cables with Cat.6A plugs can only be disconnected from the device by pressing the latching tab on the RJ45 connector.
The Cat.7 network cables are backward compatible, so they can be used in Cat.5 or Cat.6 networks and speeds of up to 10 Gbit/s can be achieved.
The Cat.7 ethernet cable is basically an upgrade to the Cat.6A cable: The Cat.6A network cable is equipped with a Cat.7 raw cable from EFB-Elektronik. As a result, it is capable of an operating frequency of up to 600 MHz and a transmission speed of up to 10 Gbit/s. In contrast, the Cat.6A raw cable has an operating frequency of 500 MHz. Due to the increased frequency, the Cat.7 network cable can handle significantly more data traffic.
The halogen-free outer jacket of the Cat.7 cable provides additional safety. The patch cords are produced with a Cat.7 raw cable to ensure the highest possible performance. They are perfect for use in high-speed networks and for connecting routers, switches, lighting systems, digital displays, computers or any of the many new IoT devices. The Cat.7 network cable with CAT.6a plug shows its strength best when used in conjunction with the EFB-Elektronik wall plate and the EFB-Elektronik patch panel. These products can easily handle the demanding standards of a high-speed environment that a Cat.7 ethernet cable deployment creates. Cat.7 cables are used, among other things, in professional IT networks and in media technology, where large amounts of data have to be transmitted reliably.
Cat.7 ethernet cable with gold contacts in the CAT.6A RJ45 connector
Each Cat.7 cablepair within the Cat.7 patch cables is individually shielded in metal foil (PIMF). This makes these cables particularly suitable for interference-free data transmission. Due to its kink and jack protection, the high-quality, shielded RJ45 plug with gold-plated contacts can survive a high number of mating cycles undamaged.
Your devices will remain connected to the Internet even if they are moved unintentionally: These Cat.7 patch cables with Cat.6A plugs can only be disconnected from the device by pressing the latching tab on the RJ45 connector.
The Cat.7 network cables are backward compatible, so they can be used in Cat.5 or Cat.6 networks and speeds of up to 10 Gbit/s can be achieved.
| AWG-size: | 27/7 |
|---|---|
| Allocation: | acc. TIA/EIA 568B |
| Anti-kink sleeve: | moulded-on |
| Area of Application: | Data center |
| Cable construction: | 4x2 |
| Cable type: | S/FTP |
| Category: | 6A (TIA) |
| Colour anti-kink sleeve: | white |
| Colour outer sheath: | white |
| Conductor Material: | Copper |
| Connector type: | RJ45 standard |
| Contacts: | 3 µ" Gold plated |
| Jacket Material: | LSZH |
| Length imprint: | True |
| Locking lever: | True |
| Model: | shielded |
| Outer diameter of the cable: | 6.0 mm |
| Pin assignment: | 1:1 |
| Printing: | Cat.7 Raw Cable S/FTP 4x2xAWG27/7 PIMF ISO/IEC 11801 & EN50173-1 TIA/EIA 568 C.2 Halogen Free ***10Gigabit*** www.efb-elektronik.de |
| Raw cable: | Cat.7 |
| Suitable for degree of protection (IP): | IP20 |
| Type of connector connection 1: | RJ45 8(8) |
| Type of connector connection 2: | RJ45 8(8) |
Technical properties
| AWG-size: | 27/7 |
|---|---|
| Allocation: | acc. TIA/EIA 568B |
| Anti-kink sleeve: | moulded-on |
| Area of Application: | Data center |
| Cable construction: | 4x2 |
| Cable type: | S/FTP |
| Category: | 6A (TIA) |
| Colour anti-kink sleeve: | white |
| Colour outer sheath: | white |
| Conductor Material: | Copper |
| Connector type: | RJ45 standard |
| Contacts: | 3 µ" Gold plated |
| Jacket Material: | LSZH |
| Length imprint: | True |
| Locking lever: | True |
| Model: | shielded |
| Outer diameter of the cable: | 6.0 mm |
| Pin assignment: | 1:1 |
| Printing: | Cat.7 Raw Cable S/FTP 4x2xAWG27/7 PIMF ISO/IEC 11801 & EN50173-1 TIA/EIA 568 C.2 Halogen Free ***10Gigabit*** www.efb-elektronik.de |
| Raw cable: | Cat.7 |
| Suitable for degree of protection (IP): | IP20 |
| Type of connector connection 1: | RJ45 8(8) |
| Type of connector connection 2: | RJ45 8(8) |
Variants
| Item no. | Name | Length | |
|---|---|---|---|
| EC020200132 | RJ45 Patch Cable CAT7 Raw Cable WHITE 0,15m S/FTP PIMF Network Cable LAN DSL | 0.15 m | |
| EC020200133 | RJ45 Patch Cable CAT7 Raw Cable WHITE 0,25m S/FTP PIMF Network Cable LAN DSL | 0.25 m | |
| EC020200134 | RJ45 Patch Cable CAT7 Raw Cable WHITE 0,5m S/FTP PIMF Network Cable LAN DSL | 0.50 m | |
| EC020200135 | RJ45 Patch Cable CAT7 Raw Cable WHITE 1m S/FTP PIMF Network Cable LAN DSL | 1.0 m | |
| EC020200136 | RJ45 Patch Cable CAT7 Raw Cable WHITE 1,5m S/FTP PIMF Network Cable LAN DSL | 1.5 m | |
| EC020200137 | RJ45 Patch Cable CAT7 Raw Cable WHITE 2m S/FTP PIMF Network Cable LAN DSL | 2.0 m | |
| EC020200138 | RJ45 Patch Cable CAT7 Raw Cable WHITE 3m S/FTP PIMF Network Cable LAN DSL | 3.0 m | |
| EC020200139 | RJ45 Patch Cable CAT7 Raw Cable WHITE 5m S/FTP PIMF Network Cable LAN DSL | 5.0 m | |
| EC020200140 | RJ45 Patch Cable CAT7 Raw Cable WHITE 7,5m S/FTP PIMF Network Cable LAN DSL | 7.5 m | |
| EC020200141 | RJ45 Patch Cable CAT7 Raw Cable WHITE 10m S/FTP PIMF Network Cable LAN DSL | 10.0 m | |
| EC020200142 | RJ45 Patch Cable CAT7 Raw Cable WHITE 15m S/FTP PIMF Network Cable LAN DSL | 15.0 m | |
| EC020200143 | RJ45 Patch Cable CAT7 Raw Cable WHITE 20m S/FTP PIMF Network Cable LAN DSL | 20.0 m | |
| EC020200144 | RJ45 Patch Cable CAT7 Raw Cable WHITE 25m S/FTP PIMF Network Cable LAN DSL | 25.0 m | |
| EC020200145 | RJ45 Patch Cable CAT7 Raw Cable WHITE 30m S/FTP PIMF Network Cable LAN DSL | 30.0 m | |
| EC020200146 | RJ45 Patch Cable CAT7 Raw Cable WHITE 50m S/FTP PIMF Network Cable LAN DSL | 50.0 m |
Product information for RJ45 Patch Cable CAT7 Raw Cable WHITE 5m S/FTP PIMF Network Cable LAN DSL
Cat.7 cable: more data through the wire
The Cat.7 ethernet cable is basically an upgrade to the Cat.6A cable: The Cat.6A network cable is equipped with a Cat.7 raw cable from EFB-Elektronik. As a result, it is capable of an operating frequency of up to 600 MHz and a transmission speed of up to 10 Gbit/s. In contrast, the Cat.6A raw cable has an operating frequency of 500 MHz. Due to the increased frequency, the Cat.7 network cable can handle significantly more data traffic.
The halogen-free outer jacket of the Cat.7 cable provides additional safety. The patch cords are produced with a Cat.7 raw cable to ensure the highest possible performance. They are perfect for use in high-speed networks and for connecting routers, switches, lighting systems, digital displays, computers or any of the many new IoT devices. The Cat.7 network cable with CAT.6a plug shows its strength best when used in conjunction with the EFB-Elektronik wall plate and the EFB-Elektronik patch panel. These products can easily handle the demanding standards of a high-speed environment that a Cat.7 ethernet cable deployment creates. Cat.7 cables are used, among other things, in professional IT networks and in media technology, where large amounts of data have to be transmitted reliably.
Cat.7 ethernet cable with gold contacts in the CAT.6A RJ45 connector
Each Cat.7 cablepair within the Cat.7 patch cables is individually shielded in metal foil (PIMF). This makes these cables particularly suitable for interference-free data transmission. Due to its kink and jack protection, the high-quality, shielded RJ45 plug with gold-plated contacts can survive a high number of mating cycles undamaged.
Your devices will remain connected to the Internet even if they are moved unintentionally: These Cat.7 patch cables with Cat.6A plugs can only be disconnected from the device by pressing the latching tab on the RJ45 connector.
The Cat.7 network cables are backward compatible, so they can be used in Cat.5 or Cat.6 networks and speeds of up to 10 Gbit/s can be achieved.
The Cat.7 ethernet cable is basically an upgrade to the Cat.6A cable: The Cat.6A network cable is equipped with a Cat.7 raw cable from EFB-Elektronik. As a result, it is capable of an operating frequency of up to 600 MHz and a transmission speed of up to 10 Gbit/s. In contrast, the Cat.6A raw cable has an operating frequency of 500 MHz. Due to the increased frequency, the Cat.7 network cable can handle significantly more data traffic.
The halogen-free outer jacket of the Cat.7 cable provides additional safety. The patch cords are produced with a Cat.7 raw cable to ensure the highest possible performance. They are perfect for use in high-speed networks and for connecting routers, switches, lighting systems, digital displays, computers or any of the many new IoT devices. The Cat.7 network cable with CAT.6a plug shows its strength best when used in conjunction with the EFB-Elektronik wall plate and the EFB-Elektronik patch panel. These products can easily handle the demanding standards of a high-speed environment that a Cat.7 ethernet cable deployment creates. Cat.7 cables are used, among other things, in professional IT networks and in media technology, where large amounts of data have to be transmitted reliably.
Cat.7 ethernet cable with gold contacts in the CAT.6A RJ45 connector
Each Cat.7 cablepair within the Cat.7 patch cables is individually shielded in metal foil (PIMF). This makes these cables particularly suitable for interference-free data transmission. Due to its kink and jack protection, the high-quality, shielded RJ45 plug with gold-plated contacts can survive a high number of mating cycles undamaged.
Your devices will remain connected to the Internet even if they are moved unintentionally: These Cat.7 patch cables with Cat.6A plugs can only be disconnected from the device by pressing the latching tab on the RJ45 connector.
The Cat.7 network cables are backward compatible, so they can be used in Cat.5 or Cat.6 networks and speeds of up to 10 Gbit/s can be achieved.
| AWG-size: | 27/7 |
|---|---|
| Allocation: | acc. TIA/EIA 568B |
| Anti-kink sleeve: | moulded-on |
| Area of Application: | Data center |
| Cable construction: | 4x2 |
| Cable type: | S/FTP |
| Category: | 6A (TIA) |
| Colour anti-kink sleeve: | white |
| Colour outer sheath: | white |
| Conductor Material: | Copper |
| Connector type: | RJ45 standard |
| Contacts: | 3 µ" Gold plated |
| Jacket Material: | LSZH |
| Length imprint: | True |
| Locking lever: | True |
| Model: | shielded |
| Outer diameter of the cable: | 6.0 mm |
| Pin assignment: | 1:1 |
| Printing: | Cat.7 Raw Cable S/FTP 4x2xAWG27/7 PIMF ISO/IEC 11801 & EN50173-1 TIA/EIA 568 C.2 Halogen Free ***10Gigabit*** www.efb-elektronik.de |
| Raw cable: | Cat.7 |
| Suitable for degree of protection (IP): | IP20 |
| Type of connector connection 1: | RJ45 8(8) |
| Type of connector connection 2: | RJ45 8(8) |
| AWG-size: | 27/7 |
|---|---|
| Allocation: | acc. TIA/EIA 568B |
| Anti-kink sleeve: | moulded-on |
| Area of Application: | Data center |
| Cable construction: | 4x2 |
| Cable type: | S/FTP |
| Category: | 6A (TIA) |
| Colour anti-kink sleeve: | white |
| Colour outer sheath: | white |
| Conductor Material: | Copper |
| Connector type: | RJ45 standard |
| Contacts: | 3 µ" Gold plated |
| Jacket Material: | LSZH |
| Length imprint: | True |
| Locking lever: | True |
| Model: | shielded |
| Outer diameter of the cable: | 6.0 mm |
| Pin assignment: | 1:1 |
| Printing: | Cat.7 Raw Cable S/FTP 4x2xAWG27/7 PIMF ISO/IEC 11801 & EN50173-1 TIA/EIA 568 C.2 Halogen Free ***10Gigabit*** www.efb-elektronik.de |
| Raw cable: | Cat.7 |
| Suitable for degree of protection (IP): | IP20 |
| Type of connector connection 1: | RJ45 8(8) |
| Type of connector connection 2: | RJ45 8(8) |
Variants
| Item no. | Name | Length | |
|---|---|---|---|
| EC020200132 | RJ45 Patch Cable CAT7 Raw Cable WHITE 0,15m S/FTP PIMF Network Cable LAN DSL | 0.15 m | |
| EC020200133 | RJ45 Patch Cable CAT7 Raw Cable WHITE 0,25m S/FTP PIMF Network Cable LAN DSL | 0.25 m | |
| EC020200134 | RJ45 Patch Cable CAT7 Raw Cable WHITE 0,5m S/FTP PIMF Network Cable LAN DSL | 0.50 m | |
| EC020200135 | RJ45 Patch Cable CAT7 Raw Cable WHITE 1m S/FTP PIMF Network Cable LAN DSL | 1.0 m | |
| EC020200136 | RJ45 Patch Cable CAT7 Raw Cable WHITE 1,5m S/FTP PIMF Network Cable LAN DSL | 1.5 m | |
| EC020200137 | RJ45 Patch Cable CAT7 Raw Cable WHITE 2m S/FTP PIMF Network Cable LAN DSL | 2.0 m | |
| EC020200138 | RJ45 Patch Cable CAT7 Raw Cable WHITE 3m S/FTP PIMF Network Cable LAN DSL | 3.0 m | |
| EC020200139 | RJ45 Patch Cable CAT7 Raw Cable WHITE 5m S/FTP PIMF Network Cable LAN DSL | 5.0 m | |
| EC020200140 | RJ45 Patch Cable CAT7 Raw Cable WHITE 7,5m S/FTP PIMF Network Cable LAN DSL | 7.5 m | |
| EC020200141 | RJ45 Patch Cable CAT7 Raw Cable WHITE 10m S/FTP PIMF Network Cable LAN DSL | 10.0 m | |
| EC020200142 | RJ45 Patch Cable CAT7 Raw Cable WHITE 15m S/FTP PIMF Network Cable LAN DSL | 15.0 m | |
| EC020200143 | RJ45 Patch Cable CAT7 Raw Cable WHITE 20m S/FTP PIMF Network Cable LAN DSL | 20.0 m | |
| EC020200144 | RJ45 Patch Cable CAT7 Raw Cable WHITE 25m S/FTP PIMF Network Cable LAN DSL | 25.0 m | |
| EC020200145 | RJ45 Patch Cable CAT7 Raw Cable WHITE 30m S/FTP PIMF Network Cable LAN DSL | 30.0 m | |
| EC020200146 | RJ45 Patch Cable CAT7 Raw Cable WHITE 50m S/FTP PIMF Network Cable LAN DSL | 50.0 m |