INFRALAN® Cat.7A Installation Cable S/FTP 1500 MHz CPR Cca
INFRALAN®Cat.7A 1500 AWG22,S/FTP,2x4P,CPR Cca,25Gbit/s ready rape yellow RAL1021
Item number:
999830DX.500-CPR
EAN no.:
4049759250003
Product information for INFRALAN®Cat.7A 1500 AWG22,S/FTP,2x4P,CPR Cca,25Gbit/s ready rape yellow RAL1021
The INFRALAN® installation cable 99983.x-CPR is constructed for transmissions up to 1500 MHz and exceeds with the electrical transmission properties and requirements of the category 7A. Suitable for structured cabling of Class E, EA, F and FA according to ISO/IEC 11801 (AMD 2:2009) resp. EN 50173-1 (2009). The individual stranded pairs are protected with a screen foil (PiMF) and a total braided shield against radiation into the cable, as well as this excellent protection prevents the radiation of signals from the cable out. This shielding guarantees compliance with the interference emission according to Class B EN 55022, as well as immunity to interference according to EN 55024. The stranding of the individual pairs is optimized in such a way that the delay skew between the pairs (skew) with the greatest possible decoupling (crosstalk) is minimal. With this cable transmission rates up to 10 GBit according to IEEE 802.3 are possible.
Technical properties
| AWG-size: | 22/1 |
|---|---|
| Armour: | none |
| Bending radius (dynamic): | 70 mm |
| Bending radius (static): | ≥ 35 mm |
| Cable: |
EN 50288-4-1 1500 IEC 61156-6 |
| Cable silicone free: | True |
| Cable structure: | S/FTP |
| Cable type: | EFB Cat.7A S/FTP 1500 AWG22 Cca |
| Cabling standards: |
EN 50173-1 ISO/IEC 11801 |
| Capacity to earth: | 43 pF/km |
| Category: | 7A |
| Characteristic impedance: | 100 ± 5 Ohm |
| Conductor category: | Class 1 = solid |
| Conductor material: | Copper, tinned |
| Core identification: | Colour |
| Core insulation: | Foam-Skin-PE |
| Coupling attenuation: | ≤ 85 dB |
| Coupling attenuation Type: | Type 1 |
| Diameter conductor: | 0.62 mm |
| Dielectric strength DC: | 1 kV/1 min |
| Directive/Regulation: | RoHS 2011/65/UE |
| Euro class: | Cca |
| Flame retardant: | acc. to EN 60332-1 |
| Halogen free: | acc. to EN 60754-1/2 |
| Halogen free (acc. EN 50267-2-2): | True |
| Halogen free (according to EN 60754-1/2): | True |
| Harmonised Standard: | EN 50575 |
| Installation standard: | EN 50174 |
| Insulation resistance (500V): | ≥ 5000 MOhm/km |
| Jacket material: | FRNC-B |
| Loop resistance: | 120 Ohm/km |
| Low smoke: | acc. to EN 61034 |
| Low smoke (acc. EN 61034-2): | True |
| Max. frequency: | MHz MHz |
| NVP value: | 78 % |
| Operating temperature, fix: | -20 – 60 °C |
| Operating temperature, flexible: | 0 – 50 °C |
| Operating temperature, storage: | 0 – 50 °C |
| PoE: |
acc. to IEEE802.3af PoE acc. to IEEE802.3at PoE+ acc. to IEEE802.3bt 4PPoE |
| Resistance unbalance: | 2 % |
| Screen over stranding: | braiding |
| Screen over stranding element: | Foil |
| Separation class acc. EN50174-2: | D |
| Stranding element: | Pairs |
| Test voltage DC, 1 min: | 1000 V |
| Transfer impedance at 1MHz: | ≤ 5 mOhm/m |
| Transfer impedance at 10MHz: | ≤ 5 mOhm/m |
| Transfer impedance at 30MHz: | ≤ 5 mOhm/m |
| Transfer impedance at 100MHz: | ≤ 10 mOhm/m |
| Transmission standards: | IEEE 802.3 10Mbit bis 10Gbit |
| UV resistant: | False |
Safety instructions
Do not use the device if the cable or plug is damaged. This device may only be used in dry environments. Avoid faulty electrical connections. Only use the device within the specified voltage range.
Manufacturer information
EFB-Elektronik GmbH
Striegauer Str. 1
33719 Bielefeld
info@efb-elektronik.de
https://www.efb-elektronik.de
