INFRALAN® Cat.7A 1500 AWG22,S/FTP 4P ,CPR Cca,25Gbit/s ready,rape yellow RAL1021
Prices only visible for logged in users
INFRALAN® Cat.7A 1500 AWG22,S/FTP 4P ,CPR Cca,25Gbit/s ready,rape yellow RAL1021
Item number:
999830.500-CPR
EAN no.:
4049759249991
Product information for INFRALAN® Cat.7A 1500 AWG22,S/FTP 4P ,CPR Cca,25Gbit/s ready,rape yellow RAL1021
The INFRALAN® installation cable 99983.x-CPR is constructed for transmissions up to 1500 MHz and exceeds with the electrical transmission properties and requirements of the category 7A. Suitable for structured cabling of Class E, EA, F and FA according to ISO/IEC 11801 (AMD 2:2009) resp. EN 50173-1 (2009). The individual stranded pairs are protected with a screen foil (PiMF) and a total braided shield against radiation into the cable, as well as this excellent protection prevents the radiation of signals from the cable out. This shielding guarantees compliance with the interference emission according to Class B EN 55022, as well as immunity to interference according to EN 55024. The stranding of the individual pairs is optimized in such a way that the delay skew between the pairs (skew) with the greatest possible decoupling (crosstalk) is minimal. With this cable transmission rates up to 10 GBit according to IEEE 802.3 are possible.
Technical properties
| AWG-size: | 22/1 |
|---|---|
| Bending radius (dynamic): | ≥ 70 mm |
| Bending radius (static): | ≥ 35 mm |
| Cable: |
EN 50288-9-1 IEC 61156-7 |
| Cable Construction: | S/FTP |
| Cable silicone free: | True |
| Cabling standards: |
EN 50173-1 ISO/IEC 11801 |
| Capacity to earth: | ≤ 1200 pF/km |
| Category: | 7A |
| Characteristic impedance: | 100 ± 5 Ohm |
| Conductor category: | Class 1 = solid |
| Conductor material: | Cu, tinned |
| Core identification: | Colour |
| Core insulation: | foam-skin PE |
| Coupling attenuation: | ≥ 85 dB |
| Coupling attenuation Type: | Type 1 |
| Diameter conductor: | 0.64 mm |
| Dielectric strength DC: | 1 kV/1 min |
| Directive/Regulation: |
REACH 1907/2006/EC RoHS 2011/65/UE |
| Euro class: | Cca |
| Flame retardant: | acc. EN 60332-1 |
| Halogen free: | acc. EN 60754-1/2 |
| Halogen free (acc. EN 50267-2-2): | True |
| Halogen free (according to EN 60754-1/2): | True |
| Harmonised Standard: | EN 50575 |
| Installation standard: | EN 50174 |
| Insulation resistance (500V): | ≥ 5000 MOhm/km |
| Jacket Material: | FRNC-B |
| Loop resistance: | ≤ 120 Ohm/km |
| Low smoke: | acc. EN 61034-2 |
| Low smoke (according to EN 61034-2): | True |
| Max. Freuqency: | 1500 MHz |
| NVP value: | 78 % |
| Operating temperature, storage: | 0 – 50 °C |
| Permitted cable outer temperature after assembling without vibration: | -20 – 60 °C |
| Permitted cable outer temperature during assembling/handling: | 0 – 50 °C |
| PoE: |
acc. to IEEE802.3af PoE acc. to IEEE802.3at PoE+ acc. to IEEE802.3bt 4PPoE |
| Resistance unbalance: | ≤ 2 % |
| Screen over stranding: | braiding |
| Screen over stranding element: | Foil |
| Separation class acc. EN50174-2: | D |
| Stranding element: | Pairs |
| Test voltage DC, 1 min: | 1000 V |
| Transfer impedance at 1MHz: | ≤ 5 mOhm/m |
| Transfer impedance at 10MHz: | ≤ 5 mOhm/m |
| Transfer impedance at 30MHz: | ≤ 5 mOhm/m |
| Transfer impedance at 100MHz: | ≤ 10 mOhm/m |
| Transmission standards: | IEEE 802.3 10Mbit to 10Gbit |
| UV resistance: | no |
sold with
necessary tools
